Service
Contact
Service times
Mo - Fr: 9:00 - 18:00
Sa: 9:00 - 14:00
Select delivery country
Description
Die Kährs Avanti Collection garantiert zeitlose und qualitativ hochwertige Parkettböden als Landhausdiele oder im Schiffsboden-Stil.
- 4-seitige V-Fuge Die Fugen schützen die Dielenkanten und verhindern das Absplittern von Holzfasern. Sie machen den Echtholzboden widerstandsfähiger und verleihen dem Raum ein wunderschönes Ambiente. Man kann den Boden ganz einfach mit dem Staubsauger oder einem Besen säubern.
- mattlackiert oder naturgeölt Die mattlackierte oder naturgeölte Oberfläche sorgt für einen höchst widerstandsfähigen und abriebfesten Schutz und erzeugt ein angenehmes Flair in jedem Raum. Sie können trotz täglicher Beanspruchung von einem dauerhaften Schutz profitieren.
- 3-mal abschleifbar Die Echtholzböden der Avanti Collection von Kährs sind bis zu 3-mal abschleifbar und somit eine langlebige Wahl für Ihr Zuhause.
- Woodloc®-Verriegelungssystem Mithilfe des Woodloc®-Verriegelungssystems können Kährs Parkettböden ganz schnell und einfach ohne Fugenbildung zwischen den Dielen verlegt werden.
- Nachhaltige Herstellung Kährs trägt das Gütesiegel Der Blaue Engel, welche eine umweltschonende ökologische Forstwirtschaft garantiert. Die Produkte bestehen aus natürlichen, emissionsarmen und CO²-neutralen Materialien und werden in Schweden hergestellt.
The traditional company Kährs has been offering complete flooring solutions for private homes and commercial properties since 1857. Sweden's leading wooden flooring manufacturer invented finished parquet (multi-layer parquet) and glueless interlocking. Kährs created a patented innovation in 1941 with a multilayer wood floor that is stable and environmentally friendly. Kährs' multi-layer parquet is made from renewable raw materials and can be recycled. In 1958, Kährs launched the first factory lacquered parquet floor. The company is the first parquet manufacturer to introduce a solvent-free lacquer. In 2000, Kährs offered Woodlock, the first click-jointed parquet floor. Kährs is part of Kährs Group, the global market leader in wood flooring and PVC-free resilient flooring.
| item no. | 141180185 |
|---|---|
| Manufacturer | Kährs |
| Length in mm | 1900 |
| Width in mm | 190 |
| Thickness in mm | 14 |
| installation pattern | Plank pattern (1-plank) |
| Installation type | click |
| Sorting (grain) | lively/rustic |
| Wood type | Oak |
| Surface treatment | oiled |
| Underfloor heating | suitable |
| EAN | 7393969047302 |
| Click system | 5G |
| Collection | Avanti Collection |
| Colour | grey |
| Joint | Beveled edge (4 sides) |
| Piece per package | 8 |
| Range of application | Residential |
| Shipping group | L |
| Structure | 3-layer |
| Wear layer | 3,0 mm |
| Weight | 23,04 kg/Packing |
| Package Content | 2.88 m² |
|
Show all data ▼
|
|
| Downloads | |
Kährs - Pflegeanleitung
|
|
|
Kährs - Reparaturanleitung
|
|
|
Kährs Woodloc 5S - Verlegeanleitung
|
|
|
Kährs - Unterboden und Fußbodenheizung
|
|
|
Kährs durchgehende Verlegung - Merkblatt
|
|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ 05222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
Laying guide of the parquet
Variant: DIY-Instruction
button
1. substrate check
The subfloor should be permanently dry, load-bearing and even.
ATTENTION: Never lay parquet over a soft subfloor, e.g. over carpet, cork or any type of foam underlay.
button
2. acclimatisation
The planks should be stored horizontally in the room where they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.
Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!
button
3. subfloor preparation
Then clean the surface to be laid with a hoover. Any unevenness exceeding 3 mm per linear metre is sanded down and filled with a floor levelling compound.
Click:
button
4. before laying
Spread out the PE foil with an overlap of approx. 10 cm and tape it down.Now you can lay out the strips of impact sound insulation butt to butt against the laying direction of the floor covering and fix all overlaps with aluminium tape. The foil side should always face upwards.
Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.
button
5. laying instructions
Lay the first plank well aligned on the subfloor, taking the edge distances into account. You can start laying the floor on the left side of the room. In the first row, the plank is clicked in with the front side. Use a rubber mallet to tap lightly on the front side so that the click connection snaps in well. In the next row, the planks are first clicked in with the long side and then the ends can be fixed by tapping lightly. To cut a plank, now take measurements and mark the plank. This is then cut with a jigsaw or crosscut saw.
ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall and between the flooring and all fixed components.
button
6. last row
Cut the planks of the last row to size and click them in place using a pull iron. Finally, the planks can be tapped down again with a hammer.
button
7. finish
The PU foil is now cut approx. 2 cm high and the skirting boards can be fitted. Here there is the click or glue variant.
Glue:
button
4 Before gluing
Lay out the first two rows of planks and make marks in the subfloor with a pencil. The planks can be cut to size using a crosscut saw.
Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.
button
5. laying instructions
Now pick up the planks again and apply the adhesive up to the marking with a notched trowel. Align the first plank and place it in the wet bed. The second plank is clicked into the already lying plank with the front side. The boards of the next row are laid first with the long side, then with the short side. Then the adhesive for the next two rows can be applied and the planks can be glued.
ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall as well as to all fixed components.
button
6. last row
Finally, you can attach the skirting boards.
What you will need to make it yourself
Material:
Click version:
- Parquet
- Vapour barrier
- PE foil
- Aluminium tape
Adhesive variant:
- Parquet
- Adhesive
Tools:
- Professional cutter knife
- Spirit level
- Pulling iron
- Pencil
- Rubber mallet
- Tapping block
- Measuring tape
- Spacer
optional:
- Skirting boards
- Template for herringbone pattern
Working time:
- Clicking: for a room size of 15-20 m² approx. 4-5 hours.
- Gluing: for a room size of 15-20 m² approx. 6 hours
Level of difficulty:
- Clicking: easy
- Gluing: difficult
Helpful Videos
button planeo parquet laying guide
button Glueing parquet - Glueing parquet flooring to a wooden subfloor
button 10 most common mistakes when glueing parquet
button Glueing parquet to self-adhesive insulation
button Engineered Wood Flooring Oak 1-plank UV-oiled floating installation
button Discolouring of parquet - UV radiation and the effects
button Parquet flooring in the kitchen
button Oiled parquet. Advantages and disadvantages
button Varnished parquet. Advantages and disadvantages
button Storing parquet flooring properly - here's what you should consider before laying it!
button Herringbone parquet easy to install yourself - click herringbone flooring/p>
Individual offer?
Are you looking for a lower price? Just ask us for an individual offer!
Inquery
Inquery