MSRP 67,09 €

Package price (2,24 m²): 53,54 €

MSRP 29,95 €

Price 1 m²: 23,90 €

FREE

SAMPLE

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Als Treppenstufe anfragen

planeo Rigid Click Vinyl - Metro Oak | Impact sound insulation integrated (DF-K-132-055)

0.55 mm wear layer - 33 trades (intensive) - Rigid SPC + insulation - micro bevel - DropDown click system - wood look - wideplank - beige - authentic appearance - waterproof - easy to clean - easy installation

Item no.: DF-K-132-055

Natural wood look noble matt authentic surface.
UV-coating resistant and easy-care coating.
Waterproof and antibacterial for all living areas & damp rooms (kitchen & bathroom).
Particularly high dimensional stability thanks to phthalate-free rigid core board.
Integrated footfall sound insulation
Suitable for hot water underfloor heating.

Also available as adhesive vinyl in 2 usage variants: DF-D-732-030 and DF-D-342-055

Als Treppenstufe anfragen

Offer request

Description

Technical data

DIY - Videos

Product description

Our Rigid click vinyl from planeo impresses with its realistic oak wood design, authentic grain and radiant colours that give your home a cosy and inviting atmosphere.

High durability: Thanks to UV coating, the surface is extremely abrasion-resistant and resistant to scratches, wear and moisture. This makes it ideal for high-traffic areas.
Stain-resistant: Easy to clean, even with stubborn stains.
Lightfast: The colours remain permanently beautiful - even in intense sunlight.
Dimensionally stable: Insensitive to temperature fluctuations, ideal for laying on underfloor heating systems.
Durability: These floors are known for their durability and retain their quality and appearance over long periods of time.
Stable I4F DropDown click connection: Secure hold on all four sides - time-saving installation guaranteed.
Integrated footfall sound insulation: Reduces footfall noise by up to 21 dB - for a pleasant feeling in the room.

planeo

planeo is the brand for professional solutions with tested quality. In our extensive range, you will find first-class products for home and garden, from floors to wall coverings to decking: we offer you suitable items with a top price-performance ratio for almost every requirement and budget. We also have product lines such as carpets, wall paints, wallpapers and doors. The range of attractive offers for walls, floors and patios is rounded out by high-quality accessories and effective cleaning and maintenance products. Meanwhile, planeo's services go beyond the trade in floor coverings. We put great emphasis on the idea of service in everything we do. We deal with the topics of material, handling and realisation in such detail that we can provide you with an adequate solution for many different situations on the building site. To make things more clear, you can find useful tips and instructions in our guides with articles and videos. Beautiful flooring and more? Realise easily with planeo.

item no.: DF-K-132-055

hardwearing
waterproof
ideal for kitchen & bathroom
integrated impact sound
antibacterial
easy to clean
good for renovations

Technical data

item no.	DF-K-132-055
Manufacturer	planeo
Length in mm	1220
Width in mm	229
Thickness in mm	5
Wear layer	0,55 mm
Wear class	33 Commercial (heavy)
Joint	Micro bevel
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Sorting (grain)	lively/rustic
Special features	Integrated impact sound, Pet Friendly, Suitable for humid rooms, Waterproof
EAN	4062212228432
Piece per package	8
Structure	Rigid SPC + insulation
Click system	I4F
Slip resistance	R9
Shipping group	M
Weight	18,29 kg / Packing
Colour	beige
Style	Modern
Range of application	Residential, Commercial
Click variant	DropDown
Underfloor heating	Hydronic UFH compatible
Package Content	2,24 m²

Downloads

planeo Rigid Klick Vinyl Trittschall integr. - Datenblatt

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

planeo Rigid Click Vinyl - Metro Oak | Impact sound insulation integrated (DF-K-132-055)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?