MSRP 85,17 €

Package price (1,74 m²): 81,61 €

MSRP 48,94 €

Price 1 m²: 46,90 €

FREE

SAMPLE

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Skaben click vinyl - NordicPro Hexenberg XL | integrated impact sound insulation (SNP-6203602)

0,55 mm Wear layer - 32 Commercial (moderate) - Rigid SPC - Micro bevel - Click system UniClic - Wood effect - Plank pattern - grey - waterproof - Non-slip - Easy to clean

Item no.: SNP-6203602

Integrated impact sound insulation.
Rigid SPC - mineral high density core board.
Absolutely waterproof and suitable for kitchens and bathrooms.
Can be laid over large areas without expansion joints - up to 400m².
Low swelling and shrinkage behaviour.
Suitable for private and commercial use.
Phthalate-free - no harmful plasticisers.
QNG eligible.

Integrated impact sound insulation.
Rigid SPC - mineral high density core board.
Absolutely waterproof and suitable for kitchens and bathrooms.
Can be laid over large areas without expansion joints - up to 400m².
Low swelling and shrinkage behaviour.
Suitable for private and commercial use.
Phthalate-free - no harmful plasticisers.
QNG eligible.

Offer request

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

NordicPro Rigid click vinyl impresses with a mineral-based, highly compacted core board and integrated footfall sound insulation. It combines robust and rigid properties with a modern wood or stone look and is suitable for many areas of application.

Robust and dimensionally stable
The integrated footfall sound insulation ensures a quiet atmosphere and is easy on the ears - perfect for a relaxed home.
Whether in the living room, kitchen or bathroom - the moisture-resistant
Easy to install & versatile in use
And the best thing? These floors are very easy to maintain, saving time and money.

Skaben

Skaben-Bodenbeläge für höchste Ansprüche:

Vinylboden von Skaben:
Authentische Holzoptik, Robustheit und Pflegeleichtigkeit zeichnen Skaben-Vinylböden aus. Die breite Auswahl an Designs ermöglicht es, den Boden perfekt an den eigenen Stil anzupassen.
Designboden von Skaben:
Innovation und individuelles Design treffen auf höchsten Gehkomfort. Skaben-Designboden bietet eine vielfältige Palette an Oberflächenstrukturen und Designs für eine einzigartige Raumgestaltung.
Laminat von Skaben:
Natürliche Holzoptik und höchste Qualität charakterisieren Skaben-Laminat. Strapazierfähig, langlebig und pflegeleicht, ist Skaben-Laminat die ideale Wahl für stilvolle Böden in Ihrem Zuhause.
Parkett von Skaben:
Die Eleganz von echtem Holz findet sich in den Parkettböden von Skaben. Mit verschiedenen Holzarten und Oberflächenstrukturen ermöglicht Skaben-Parkett eine klassische und zeitlose Raumgestaltung.

item no.: SNP-6203602

Rigid SPC - ultra-strong
waterproof
ideal for kitchen & bathroom
integrated impact sound
well suited for renovations
QNG-Ready

Technical data

item no.	SNP-6203602
Manufacturer	Skaben
Collection	NordicPro
Length in mm	1524
Width in mm	228
Thickness in mm	6.5
Wear layer	0,55 mm
Wear class	32 Commercial (moderate)
Joint	Micro bevel
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Look	Wood effect
Sorting (grain)	natural/classic
Special features	Integrated impact sound, Pet Friendly, Suitable for humid rooms
EAN	4062212202920
Piece per package	5
Structure	Rigid SPC + insulation
Slip resistance	R10
Shipping group	L
Weight	19,14 kg / Packing
Colour	grey
Style	Modern
Range of application	Residential, Commercial
Click variant	UniClic
Underfloor heating	Hydronic UFH compatible, Electric UFH compatible
Package Content	1,74 m²

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Skaben click vinyl - NordicPro Hexenberg XL | integrated impact sound insulation (SNP-6203602)

We recommend the following accessories

Product description

Skaben-Bodenbeläge für höchste Ansprüche:

Technical data

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?