We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
With the Senso Rustic, Urban and Natural collections, the manufacturer Gerflor offers self-adhesive vinyl floors with high-quality designs that impress with their natural & expressive surface structure:
- self-adhesive the planks are ready to glue down and can be processed directly. No complicated wet-bed gluing or additional impact sound insulation is necessary. All you need to do is make sure the subfloor is level.
- easy and quick installation Apply a primer/adhesive base to the subfloor, observe the flash-off time of the primer and then lay the self-adhesive vinyl flooring without the protective film applied to the reverse side
- easy to clean and water resistant cleaning the floor is child's play. All it requires is regular damp mopping. The water-resistant properties allow the floor to be laid in all living areas, including the kitchen and bathroom
- high walking comfort
Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.
| item no. | 33270311 |
|---|---|
| Manufacturer | Gerflor |
| Length in mm | 914 |
| Width in mm | 152 |
| Thickness in mm | 2 |
| Use class | 22 |
| suitable for | Bath, Kitchen, Bedroom & living room, Hallway & Corridor |
| installation pattern | Plank pattern (1-plank) |
| Installation type | self-adhesive |
| Sorting (grain) | lively/rustic |
| Look | Wood effect |
| Wood type | Larch |
| Underfloor heating | Warmwasser-FBH geeignet |
| Warranty | 10 Jahre Privat |
| EAN | 3475710250392 |
| Collection | Senso Rustic |
| Joint | No bevel |
| Piece per package | 16 |
| Shipping group | M |
| Slip resistance | R9 |
| Structure | Full vinyl |
| Style | Classic |
| Wear layer | 0,20 mm |
| Colour | brown |
| Weight | 8,58 kg/Packing |
| Package Content | 2.20 m² |
|
Show all data ▼
|
|
| Downloads | |
Gerflor Senso Rustic / Natural / Urban - Datenblatt
|
|
|
Gerflor Senso Rustic / Natural / Urban - Verlegeanleitung
|
|
|
Gerflor Wohnbeläge - Praxistipps
|
|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
button
The substrate should be permanently dry, load-bearing and even. Any unevenness is sanded down and filled with a floor levelling compound. Depending on the substrate, the preparation procedure may vary. Please check the installation instructions to see which preparation is necessary for your subfloor. The surface to be laid can then be cleaned with a hoover.
button
The vinyl planks should be stored horizontally in the room in which they are to be installed for at least 24 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.
Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!
button
Apply the bonding primer to the substrate in preparation for bonding to improve adhesion.
Tip: To achieve as uniform a floor appearance as possible, it is recommended to install panels mixed from different packages.
button
You can start with the installation on the left side of the room or in the middle of the room. First remove the protective foil and lay the first plank well aligned on the subfloor. Now press the plank firmly into place. The next planks are laid butt to butt with the planks already in place. Please note the laying direction on the back of the planks. To cut a plank, now take measurements and set the marks. Then take an angle and tear the plank with a cutter knife and break it off.
Attention: A distance of approx. 5 mm must always be maintained between the flooring and the wall as well as to all fixed components.
Material:
- Self-adhesive floor tiles
- Primer: 5720001
Tools:
- Professional cutter knife
- Angle
- Pencil
- Spacer
- Metal ruler
- Measuring tape
optional:
- Baseboards
Working time:
- approx. 2-3 hours for a room size of 15-20 m².
Level of difficulty:
- easy
Individual offer?
Are you looking for a lower price? Just ask us for an individual offer!