Choose Shipping Country
Flooring world
My Account

Gerflor PVC flooring - PRIMETEX TIMBER CLEAR - 0720

Economical floor with textile backing for all living areas

    • Qualified for hot water underfloor heating (up to 28°C).
    • Can be laid loosely up to 20m² without fixing.
    • Can be laid on almost all existing floors (see installation instructions)...
    • Suitable for kitchen and bathroom.
    • Thickness: 2mm / low noise (15db).
› Technical Details
item no. Prime0720_conf

Request a quote now

Made In France
Price 1 m² as low as:
20,85 €

  • Storage at the desired date - free of charge for up to 3 months3
  • Customer service until 6pm¹ - personal & close
  • DIY Videos - DIY instructions

We just need your E-Mail and shipping address.

Feel free to add more samples to your sample cart afterwards.


You want to redesign your home? Get inspiration with our high quality original floorboards! Order your premium sample package now and experience the quality of our products up close.

  • Shipped with their original measurements
  • Per article only one original floorboard is possible.
  • Delivery time: within three days after receipt of payment.
  • With voucher code for the next online order.

Order now Premium-Sample package!

Premium sampleprice:


With the Primetex PVC floor from Gerflor, you have a quality product with a long service life. It is perfectly suited for all private living spaces.

  • Environmentally friendly & healthy
  • The floor is 100% recyclable. The low VOC emissions contribute to a better indoor climate.
  • Very hard-wearing
  • The special surface coating prevents scratches and stains. Suitable areas of use are: Living room, dining room, hallway, children's room, guest room, bedroom, kitchen.
  • Installation methods
The floor can be glued down over the entire surface or, for areas up to 20m², it can also be laid loosely. Under certain conditions, Primetex can be laid over existing coverings such as tiles or wooden floorboards. (Please follow the manufacturer's installation instructions).

  • environmentally friendly
  • suitable for humid areas
  • resistant
  • low installation height
  • easy cleaning & maintenance
  • non-slip
  • quiet

Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.

Technical Details
item no. Prime0720_conf
Manufacturer Gerflor
Wood type Ash
Wear layer 0,25 mm
Installation type glue
Collection PRIMETEX
installation pattern Plank pattern (1-plank)
Style Classic
Look Wood effect
Thickness in mm 2
Material CV
Special features Textile back
Wear class 31 Commercial (light)
suitable for Bath, Bedroom & living room, Hallway & Corridor
Piece per package 1
Shipping group M
Range of application Residential
Package Content 120 m²
Show all data ▼
CV-Belag PRIMETEX - Datenblatt
CV-Beläge Praxistipps & Verlegeanleitung

We will help you with your questions!

A specialist adviser will be happy
to advise you personally.

☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm

Product questions

Laying guide of the PVC & CV

Variant: DIY-Instruction

1. substrate check

The first step is to check the subfloor. Sand down any unevenness and fill it with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install PVC flooring over a soft subfloor, e.g. over carpet or any type of foam underlay.

2. before installation

PVC flooring should be stored in the room where it is to be installed for at least 24 hours before the installation. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

For loose laying of an area larger than 20 m², we recommend taping the edge of the walls.

Before laying, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

3. cutting to size

Tip: To achieve as uniform a floor appearance as possible, lay the strips in relation to each other so that the patterns match exactly and the strips overlap at the seam. Unpack the roll and roll it out on the subfloor. Use a hooked blade knife to roughly pre-cut the strips.

ATTENTION: There must always be a gap of approx. 3 cm between the flooring and the wall and between the flooring and all fixed components.

4. laying instructions

4.1 Loose laying

Stick the tape strips to all edge areas and remove the foil on the back of the tapes area by area. Now fix the floor by pressing lightly. Make a double cut at the joint of the strip. To do this, lay the sheet overlapping and cut the sheet to fit exactly along the joint. You can then make the final cut with an edge distance of approx. 2 mm. The floor should be free of tension when cutting and no objects should lie on the PVC floor.

4.2 Gluing

Apply the adhesive evenly to the subfloor in strips using a notched trowel. Please observe the flash-off times specified in the data sheet. Now lay the strips in the wet bed and rub down the PVC covering. Make the final cut with an edge distance of approx. 2 mm. Finally, the substrate can be rolled with a roller to avoid air bubbles.

5. finishing loose laying

First, tape over the joints of the strips with masking tape. The masking tape can then be cut at the joint and now the strips are welded together with a cold welding adhesive. After approx. 1 hour, the masking tape can be removed.

6. attaching the skirting boards

Finally, you can attach and seal the skirting boards. PVC flooring can also be attached to existing skirtings with a mounting adhesive.

What you will need to make it yourself


  • PVC floor
  • Adhesive (glue type)


  • Hook blade knife
  • Tape
  • masking tape
  • Spacer


  • Baseboards
  • PVC cold welding paste type T

Working time:

  • for a room size of 15-20 m² approx. 2-3 hours

Level of difficulty:

  • easy
Helpful Videos


Individual offer?

Are you looking for a lower price? Just ask us for an individual offer!


We use your data exclusively for contacting you and processing your request. By sending the contact form you agree that your data will be stored and processed electronically for possible queries. We will not pass on your data to third parties. You can withdraw your consent at any time with effect for the future. Please note our data protection declaration.

* Required Fields


We use your data exclusively to contact you and process your request and, if necessary, to prepare an offer. By sending the contact form you agree that your data will be stored and processed electronically for possible queries. We do not pass on your data to third parties. You can withdraw your consent at any time with effect for the future. Please note our data protection declaration.

* Required Fields