Package price (3,06 m²): 67,17 €

Price 1 m²: 21,95 €

incl. 19% VAT. plus. 49,95 € shipping costs for deliveries to DE

M

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

MEISTER Laminate - MeisterDesign LC 55 Nevado Oak 7147 | Made in Germany (600012-1288198-07147)

31 commercial (light) - without bevel - click system Multiclic - wood look - wideplank - brown - environmentally friendly

Item no.: 600012-1288198-07147

More stable due to multi-layer product structure.
Antibacterial surface.
HDF centre layer.
For private and commercial use.
100 % natural raw materials.

Offer request

Description

Technical data

DIY - Videos

Product description

More stable due to multi-layer product structure.
Antibacterial surface.
HDF centre layer.
For private and commercial use.
100 % natural raw materials.

Meister Laminate Flooring MeisterDesign LC 55 impresses with its simplicity and functionality. The planks are both easy to clean and robust.

Antibacterial surface properties
Convenient & easy to clean

Put your trust in the proven quality of the MeisterDesign flooring range

MEISTER

MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.

item no.: 600012-1288198-07147

Simple and functional
antibacterial surface
Hot water and electric underfloor heating
Blue Angel

Technical data

item no.	600012-1288198-07147
Colour	brown
Piece per package	12
Special features	Blauer Engel
suitable for	Schlaf & Wohnzimmer, Diele & Flur
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Underfloor heating	suitable
Joint	No bevel
Look	Holzoptik
Length in mm	1288
Width in mm	198
Collection	MeisterDesign
Shipping group	M
Manufacturer	MEISTER
Thickness in mm	7

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate test

The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.

CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.

button

2. acclimatisation

The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.

button

3. subfloor preparation

Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.

Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!

button

4. laying instructions

Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.

You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.

ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.

button

5. last row

If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.

button

6. finish

Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.

MEISTER Laminate - MeisterDesign LC 55 Nevado Oak 7147 | Made in Germany (600012-1288198-07147)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Buying laminate: What do I need to know?

Laying vinyl flooring, laminate or parquet on old carpeting - is that possible?

Laminate format variants - what decor options do I have?

Laying laminate in tile look

Cheap laminate

Checking the subfloor before laying flooring