Article no more available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Wineo impact sound insulation Sound-Protect Eco Profi - 5,5m²

Professional impact sound insulation for hard coverings

Item no.: 10020223

Especially recommended for hard floors with click system.
Maximum impact sound reduction.
Ideally suited for underfloor heating.

Request alternative

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

Sound Protect Eco Profi is THE impact sound insulation on the market. You think that since you are buying a more expensive floor covering anyway, you could save on the impact sound insulation. This is the wrong approach to buying flooring. It has many more advantages than just lowering the room acoustics. Wineo's impact sound insulation is the connection between your floor covering and the subfloor.

The Sound Protect Eco Profi from Wineo is the perfectly finished mat for any floor covering. It doesn't matter whether you want to install the mat under laminate or parquet. This is the optimal solution for every area.

Impact sound insulation for all subfloors?

Sound Protect Eco Profi can be the perfect reduction in room acoustics for your floor covering on various subfloors. Whether you want to lay your new floor covering on an old wooden subfloor or old tiles during renovation, this insulation is the right choice for you. This impact sound insulation can be used for any hard floor covering such as parquet or laminate.
By choosing the Sound Protect Eco Profi from Wineo, you have definitely made the right decision.

wineo

As a brand of the internationally active company Windmöller, wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo partly feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.

item no.: 10020223

DB reduction: > 20 dB
Walking sound reduction: approx. 31 %.
Suitable for underfloor heating
Pressure resistant - 12 t/m²

Technical data

item no.	10020223
Manufacturer	Wineo
Length in mm	5500
Width in mm	1000
Thickness in mm	3
EAN	4017268231646
Weight	16,02 kg / Packing
Piece per package	1
suitable for	Parquet flooring, Laminate flooring
Shipping group	S
Package Content	1 Roll

Downloads

Print page

DIY step by step

Variant: DIY instructions

button

1. Preparation & placing of the rolls

Observe the official laying instructions provided in every package before laying the rolls, otherwise any warranty or guarantee claim will be invalid.

The subsurface should be firm, level, dry, and dust-free before laying. Before placing, thoroughly vacuum the subfloor. Store the insulating mat in the room for about 24 hours before installing it to allow the material to adapt. As soon as the substrate has been checked, the first sheet can be laid out in a well-positioned spot in the opposite direction of the top floor covering. Simply cut the first mesh from the roll using a cutting knife to separate it from the roll. When installing parquet, the rough side is laid down. When placing vinyl, the rough side should be up. A cutting knife can easily separate the mesh. To avoid overlap, the succeeding lanes are now placed end to end on the ones already in place.

ATTENTION: Please note that the edge distances of about 5 mm from the wall should be maintained.

button

2. Fix panels

To prevent the footfall sound insulation strips from slipping while paving the floor, secure them at the abutting edges using aluminium tape. Check that the strips do not overlap. There should be places of contact only at the abutting edges. You can now begin to install the floor.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Preparation & placing of the rolls

Observe the official laying instructions provided in every package before laying the rolls, otherwise any warranty or guarantee claim will be invalid.

The subsurface should be firm, level, dry, and dust-free before laying. Before placing, thoroughly vacuum the subfloor. Store the insulating mat in the room for about 24 hours before installing it to allow the material to adapt. As soon as the substrate has been checked, the first sheet can be laid out in a well-positioned spot in the opposite direction of the top floor covering. Simply cut the first mesh from the roll using a cutting knife to separate it from the roll. When installing parquet, the rough side is laid down. When placing vinyl, the rough side should be up. A cutting knife can easily separate the mesh. To avoid overlap, the succeeding lanes are now placed end to end on the ones already in place.

ATTENTION: Please note that the edge distances of about 5 mm from the wall should be maintained.

button

2. Fix panels

To prevent the footfall sound insulation strips from slipping while paving the floor, secure them at the abutting edges using aluminium tape. Check that the strips do not overlap. There should be places of contact only at the abutting edges. You can now begin to install the floor.

Wineo impact sound insulation Sound-Protect Eco Profi - 5,5m²

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

DIY step by step

Reduce the room sounds

Impact sound insulation for parquet, vinyl flooringand laminate - planeo silence

Glue quickly vinyl flooring to old flooring in a large rooms - planeo silent stick