Package price (1 Pc): 50,50 €
  • Customer service until 5pm¹ - personal & close
  • DIY Videos - DIY Instructions

planeo Profi end profile 313 - 270 cm

To be glued to vinyl, laminate and parquet flooring from 8 to 14 mm thick | base profile is glued or screwed down
Item no.: PTAB-313-27_conf
  • Length: 270 cm.
  • Cover surface: 26 mm.
  • For flooring thicknesses 8-14 mm: suitable for many laminate/parquet structures.
  • Concealed installation incl. base profile: clean look, quick installation.
  • Automatic height & inclination adjustment: Top profile engages in the base profile via the bow-toothed joint bar and fits snugly even with level differences.
  • Flat design without decorative grooves: modern and easy to clean.
  • Can be removed & snapped back into place: practical when renovating/replacing flooring.
  • TÜV-tested load capacity: dynamic 1,100 N / 80,000 load cycles, static up to 4,000 N.
  • Length: 270 cm.
  • Cover surface: 26 mm.
  • For flooring thicknesses 8-14 mm: suitable for many laminate/parquet structures.
  • Concealed installation incl. base profile: clean look, quick installation.
  • Automatic height & inclination adjustment: Top profile engages in the base profile via the bow-toothed joint bar and fits snugly even with level differences.
  • Flat design without decorative grooves: modern and easy to clean.
  • Can be removed & snapped back into place: practical when renovating/replacing flooring.
  • TÜV-tested load capacity: dynamic 1,100 N / 80,000 load cycles, static up to 4,000 N.
Free quote
Description
Technical data
DIY - Videos

Product description

The 313 end profile is a high-quality end profile with clip system for a neat wall connection and for finishing balcony and patio doors. The concealed fastening creates a perfect look without screw holes - ideal for modern floor structures made of laminate/multilayer and pre-finished parquet.
With the end profile, you can create visually clean and technically resilient finishes on wall connections and balcony doors. The profile consists of a base profile and an aluminium top profile, which is clicked into place after installation and automatically adjusts to the height and inclination of the floor covering thanks to the joint bar - for a tight, clean finish without visible fixings. For installation, the base profile is preferably glued (alternatively screwed) according to the installation instructions and the top profile is pressed/clicked into place once the adhesive has hardened. If necessary, the top profile can be released again later and locked in place again - ideal for renovations.

item no.: PTAB-313-27_conf

Technical data

item no. PTAB-313-27_conf
Manufacturer planeo
Length in mm 2700
Width in mm 26
Type End profile
Piece per package 1
Shipping group M
Mounting type screwable, for gluing
Package Content 1 Pc
Free quote