Roll (1 Pc): 7,65 €

incl. 19% VAT. plus. 4,95 € shipping costs for deliveries to DE

XS

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Wallpaper paste / universal paste for all types of wallpaper 250gr

Very high-yield paste with excellent adhesive strength

Item no.: 76045

Universal for all common wallpapers.
Very economical.
Excellent adhesive strength with correction option.
Stain-free drying.

Offer request

Description

Technical data

Product description

Universal for all common wallpapers.
Very economical.
Excellent adhesive strength with correction option.
Stain-free drying.

High-quality wallpaper / universal paste for all common types of wallpaper.

For a first-class result, use wallpaper paste from planeo. This universal paste is reinforced with synthetic resin and is ready for use in a short time.

Suitability and consumption:

for paper wallpaper
:7-8 Euro rolls, approx. 35-40m² wall surface
for satin, textured, profiled and non-woven wallpapers
:5-7 Euro rolls, approx. 25-35m²
.

Usage:
On all common, load-bearing substrates. Also on fresh, air-dry plaster and highly absorbent surfaces.

Special property:
The paste has a high adhesive power reserve and dries out without leaving stains. This gives you good correction possibilities when starting to wallpaper.

planeo

planeo is the brand for professional solutions with tested quality. In our extensive range, you will find first-class products for home and garden, from floors to wall coverings to decking: we offer you suitable items with a top price-performance ratio for almost every requirement and budget. We also have product lines such as carpets, wall paints, wallpapers and doors. The range of attractive offers for walls, floors and patios is rounded out by high-quality accessories and effective cleaning and maintenance products. Meanwhile, planeo's services go beyond the trade in floor coverings. We put great emphasis on the idea of service in everything we do. We deal with the topics of material, handling and realisation in such detail that we can provide you with an adequate solution for many different situations on the building site. To make things more clear, you can find useful tips and instructions in our guides with articles and videos. Beautiful flooring and more? Realise easily with planeo.

item no.: 76045

universal
high-yield
high adhesive strength
correctable

Technical data

item no.	76045
Piece per package	1
Length in mm	90
Width in mm	44
Shipping group	XS
Manufacturer	planeo

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

It is necessary to inspect the substrate before wallpapering. It should be clean, dry, and absorbent. Sand the walls and fill any cracks. The substrate is then primed after masking off all permanently installed items. This can be done with the basic paste, which should be diluted with 20 to 30 percent water. Apply the primer with a roller. The corners are painted with a brush.

button

2. Preparatory work

Check the necessary number of strips. The role must be set up against the wall for this reason. With a pencil, make small markings at the intersections. To ensure that the wallpaper runs straight, the reference line from the first strip is drawn. Measure the wall and cut the first strip.

Tip: Increase the required measurement by 2 cm to ensure that the first strip will work even with uneven walls.

ATTENTION: There are symbols on the back of the wallpaper to assist in installation.

button

3. Glue wallpaper

With a brush, apply the proper wallpaper adhesive to the edges, and then use a roller to coat the strip's surface. The wallpaper is then straightened along the drawn line and pressed on with a spatula. Remove any air pockets. The edges of the wallpaper can be cut off cleanly with a cutter knife. Cut the next strip according to the size of the first one. After applying the glue, utilise the edges of the already glued strip as a guide. Roll the wallpaper joints with a seam roller in the next step for a seamless transition.

Tipp: Residual paste should be wiped off immediately with a clean cloth.

button

4. Glue edges

To wallpaper the edges, measure the area and cut the needed strip to size. Then apply the paste and straighten the sheet on the first surface. The first side can now be squeezed and trimmed to size with the spatula. A sponge dipped in water can be ran over the edge to ensure a clean edge before folding it over. Apply pressure to both sides to do this. Finally, slide the spatula along the edge and pull taut away from it.