planeo FlexProtect 4LVT Joint material for design floorings Black 5KG

planeo FlexProtect 4LVT joint material for design floorings Black 5KG

Ideally suited for levelling out joints of 2 -5 mm and creating an even joint pattern

Consumption: varies depending on the width and size of the joints (see data sheet)

• ready for use, can be applied directly from the container
• suitable for wet areas (shower cubicles) in combination with the sealer planeo SafeProtect 4LVT
• easy processing
• no mixing required, light stirring is sufficient before application

Processing and application instructions:

• Only use at temperatures between +5°C and +35°C.
• joints must be clean and dry before application
• the planeo special joint board is suitable for application
• Residues can be removed with a damp sponge.
• waiting time before removing residues: 15-20 min
• Can be walked on: after 24-36 hours
• Load-bearing: grouted surfaces can be used after 72 hours