- 4 %
-4 %
MSRP  145,95 €
Package price (1 Set): 139,90 €
MSRP  145,95 €
Price 1 Set: 139,90 €
  • Customer service until 5pm¹ - personal & close
  • DIY Videos - DIY Instructions

planeo EVOLITH sealant for interior & exterior with primer

Professional sealer with primer for EVOLITH Slate&Stone natural stone wall cladding
Item no.: SLN-VER_conf
  • Areas of application: Ideal for walls, showers and bathrooms.
  • Smooth surface: Provides a high-quality finish with a pleasant feel.
  • Natural look: No to minimal colour deepening after sealing.
  • Consumption: Approx. 130-150 g/m² per coat.
  • Resistance: High - suitable for heavily used surfaces.
  • Recommended application quantity: 1 coat for lightly used surfaces and wet areas,
    2 coats for heavily used areas such as kitchen splashbacks.
  • Note on use: Suitable for wet areas, but not for permanently standing water.
  • Treated surface is particularly easy to clean.
  • Areas of application: Ideal for walls, showers and bathrooms.
  • Smooth surface: Provides a high-quality finish with a pleasant feel.
  • Natural look: No to minimal colour deepening after sealing.
  • Consumption: Approx. 130-150 g/m² per coat.
  • Resistance: High - suitable for heavily used surfaces.
  • Recommended application quantity: 1 coat for lightly used surfaces and wet areas,
    2 coats for heavily used areas such as kitchen splashbacks.
  • Note on use: Suitable for wet areas, but not for permanently standing water.
  • Treated surface is particularly easy to clean.
Offer request
Description
Technical data
DIY - Videos

Product description

EVOLITH Sealer is a high-performance, two-component sealing system including primer that has been specially developed for heavily used surfaces. It reliably protects natural stone surfaces against moisture, dirt and everyday wear and tear - ideal for interior wall and floor areas and for use in wet areas such as bathrooms and showers.

  • Preparation: Clean the surface thoroughly and keep it dry and free of dust and grease.
  • Primer: Apply evenly crosswise with a short pile roller. Do not apply heavy pressure to avoid blistering. Allow to dry for at least 3 hours.
  • Sealer: Mix both components in a ratio of 2.5:1 and apply with a roller. Again, only apply light pressure to prevent white bubbles. Allow to dry completely after application. Clean tools directly with water.
  • Multiple application: An additional application significantly increases the protection.
item no.: SLN-VER_conf

Technical data

item no. SLN-VER_conf
Manufacturer planeo
Type Sealing
Piece per package 1
Shipping group XS
Package Content 1 Set
Print page

DIY step by step

Helpful Videos

DIY step by step

Offer request