Choose Shipping Country
Flooring world
My Account

Wineo vinyl floor - 800 tile Solid Sand - 457x457mm adhesive vinyl

Robust vinyl flooring in tile format with all-round bevelled edge

    • High durability and long service life.
    • Stain-resistant and easy to clean.
    • With tactile surface embossing.
    • Without harmful softeners.
› Technical Details
item no. DB00100-3

Request a quote now

- 22 %

UVP €168.85

Package price (3,34 m²):
Price 1 m²:
incl. VAT - plus €49.95 shipping costs for CH  S

Include 5% blend

Your delivery date: until Wednesday 12. October

  • Storage at the desired date - free of charge for up to 90 days3
  • Customer service until 9pm¹ - personal & close
  • DIY Videos - DIY instructions

We just need your E-Mail and shipping address.

Feel free to add more samples to your sample cart afterwards.


The wineo 800 series offers you almost limitless variety. What makes it special is the ability to combine the different lines in the collection with each other. The products in the collection are perfectly matched to each other, so that your new floor becomes a unique composition.

  • and renovation-friendly
  • The hard-wearing wineo 800 floor offers the perfect floor for both private and commercial areas. Due to its low installation height, it can be laid over existing coverings. A feature that is particularly advantageous for renovations.
  • Suitable for damp rooms and underfloor heating
wineo 800 design floors can be easily installed in damp rooms as well as on underfloor heating systems. The floors from the wineo 800 collection invite you to be creative in your interior design. They guarantee an impressive effect in your rooms and convince with strength in terms of use and care.

  • resistant
  • non-slip
  • joint-friendly
  • easy to clean

As a brand of the internationally active company Windmöller, Wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All Wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.

At Wineo you have the choice between PURLINE organic flooring, design floors for gluing or clicking as well as laminate flooring in different usage classes and formats. Additionally, the company offers skirting boards, aluminium profiles, insulation mats, and more. Create a stylish effect in your rooms with the resilient floor coverings in trendy designs from Wineo!

Technical Details
item no. DB00100-3
Manufacturer Wineo
Length in mm 457
Width in mm 457
Thickness in mm 2.5
Use class 33/43
suitable for Business, Industry, Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern Tile format
Installation type glue
Sorting (grain) natural/classic
Look Concrete effect, Tile effect
Underfloor heating Warmwasser-FBH geeignet
Warranty 20 Jahre Privat
Special features Pet Friendly
EAN 4017268465119
Collection 800
Collection variant tile
Joint mit umlaufender Fase
Piece per package 16
Shipping group S
Slip resistance R9
Structure Full vinyl
Style Classic
Wear layer 0,55 mm
Weight 15,03 kg/Packing
Package Content 3.34 m²
Show all data ▼
Wineo 800 (gluing) - Technical data sheet EN
Wineo 800 (gluing) - Installation instruction EN
Wineo 800 (gluing) - Cleaning and care instructions EN

We will help you with your questions!

A specialist adviser will be happy
to advise you personally.

☎ +49 5222 960 4810
Mon - Fri: 9am - 9pm
Sat: 9am - 2pm

Product questions

Installation guide of theWet Bed & Silent Stick

Variant: DIY instruction wet bed bonding & Silent Stick

1. substrate preparation

The substrate should be permanently dry, load-bearing and even. Any unevenness should be sanded down and filled with a floor levelling compound. The surface to be laid can then be cleaned with a hoover.

CAUTION: Never install Silent Stick over a soft subfloor, e.g. carpet, cork or any type of foam underlay.

2. acclimatisation

The vinyl planks should be stored horizontally in the room in which it is to be installed for at least 24 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in every package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

Silent Stick (alternative to adhesive):

3. before laying

Now you can lay out the sheets in the opposite direction to the direction in which the top layer is laid. The foil side should always face upwards. Simply cut the Silent Stick to size with a cutter knife.

4. laying instructions

As soon as the strips have been laid butt to butt, the foil is removed area by area (approx. 2 planks wide) and the vinyl planks can be glued on and pressed down.

ATTENTION: There must always be a gap of approx. 5mm between the flooring and the wall and between the flooring and all fixed components.

5. finish

Afterwards, the laid surface is rolled with a roller and the skirtings can be fixed. Please note the drying times of the adhesive. If you have a large area, we recommend that you roll the laid planks after approx. 20-30 minutes so that no air bubbles form.

Classic wet-bed gluing:

3. before laying

Before applying the adhesive, open the packages and lay the elements from different packages in alternation to obtain an even decorative pattern in the area. Mark the reference points using a chalk line and cut the vinyl planks to size with a cutter knife. The planks can now be broken by simply folding them.

4. installation instructions

Apply the adhesive with a notched trowel and lay the vinyl planks in the wet bed, observing the flash-off times of the adhesive. The elements should be placed in the adhesive with little tension and with tight joints and pressed on. When doing so, observe the laying direction on the back of the vinyl planks.

ATTENTION: A gap of approx. 10mm must always be maintained between the flooring and the wall as well as to all fixed components.

5. finish

The laid surface is then rolled with a roller and the skirting boards can be fixed. Please note the drying time of the adhesive. The glued surface should be rolled after approx. 20-30 minutes so that no air bubbles form.

What you will need to make it yourself


  • Klebevinyl
  • Planeo Silent Stick / adhesive


  • Cutter knife
  • Angle
  • Pencil
  • Folding rule
  • Toothed spatula for wet bed bonding


  • Skirting boards

Working time:

  • Silent Stick: approx. 3-4 hours for 15-20m².
  • Wet bed bonding: approx. 6 hours for 15-20m².

Difficulty level:

  • Silent Stick: easy
  • Wet bed bonding: difficult

Individual offer?

Are you looking for a lower price? Just ask us for an individual offer!


We use your data exclusively for contacting you and processing your request. By sending the contact form you agree that your data will be stored and processed electronically for possible queries. We will not pass on your data to third parties. You can withdraw your consent at any time with effect for the future. Please note our data protection declaration.

* Required Fields

  • Bitte benötigtes Klebevinyl Zubehör wählen.

We use your data exclusively to contact you and process your request and, if necessary, to prepare an offer. By sending the contact form you agree that your data will be stored and processed electronically for possible queries. We do not pass on your data to third parties. You can withdraw your consent at any time with effect for the future. Please note our data protection declaration.

* Required Fields