Article no more available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Wall panelling wood planeo Woodwall Easyfix - oak nature

Self-adhesive and naturally oiled real wood panels

Item no.: EFX-101

Real wood veneer from Europe.
Clean & easy assembly thanks to adhesive strips.
Naturally oiled surface.
Unique ambience.
Breathable.

Request alternative

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

The real wood veneered and self-adhesive Planeo Woodwall Eaysyfix - Collection gives every room a uniquely beautiful and natural ambience and sets decorative 3D accents.

Substrate requirements
Easy installation
Made in EU
Naturally oiled

A durable oiled finish on the planks enhances the natural design of the 3D wood surface and makes the planks easy to clean.

planeo

planeo is the brand for professional solutions with tested quality. In our extensive range, you will find first-class products for home and garden, from floors to wall coverings to decking: we offer you suitable items with a top price-performance ratio for almost every requirement and budget. We also have product lines such as carpets, wall paints, wallpapers and doors. The range of attractive offers for walls, floors and patios is rounded out by high-quality accessories and effective cleaning and maintenance products. Meanwhile, planeo's services go beyond the trade in floor coverings. We put great emphasis on the idea of service in everything we do. We deal with the topics of material, handling and realisation in such detail that we can provide you with an adequate solution for many different situations on the building site. To make things more clear, you can find useful tips and instructions in our guides with articles and videos. Beautiful flooring and more? Realise easily with planeo.

item no.: EFX-101

sustainable
Real wood veneer
European oak
oiled

Technical data

item no.	EFX-101
Manufacturer	planeo
Length in mm	910
Width in mm	143
Thickness in mm	3.2
Material	Wood
suitable for	Bedroom & living room, Hallway & Corridor
Installation type	self-adhesive
Look	Wood effect
Wood type	Oak
Special features	Reclaimed wood, Simple assembly
EAN	4062212079560
Weight	4,00 kg / Packing
Piece per package	10.0
Collection	WoodWall
Collection variant	EasyFix
Shipping group	XS
Package Content	1,30 m²

Downloads

planeo WoodWall Easyfix - Datenblatt + Montageanleitung

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Before gluing the wall covering, the substrate must be load-bearing, clean, dry and even. Prime the substrate so that a permanent bond to the wall can be created. In the next step, mark the area to be glued with a pencil and a spirit level. Make sure that there is a gap of approx. 2-3 mm between the flooringor ceiling and the wall covering.

ATTENTION: The wall covering is not suitable for gluing it to a wallpaper!

button

2. acclimatisation

The wooden planks should be stored horizontally in the room in which they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise the room temperature and it will not "work" as much after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. preparation

Open several cartons at the same time and use panels mixed from different cartons to achieve an appealing look. For the time being, lay out the first row provisionally without mounting adhesive. Now make marks on the cut edges of the planks and cut them on the back with a chop saw or jigsaw.

Tip: If you only want to lay half a wall, you can attach tacks to the wall for support. These can be removed after the installation adhesive has dried.

button

4. glue the panels

Now start gluing the planks from left to right. Spread about 6-7 dots of the mounting adhesive on the back of the first panel. Then press the panel firmly against the wall. Pay attention to the set markings on the wall. The other panels are also attached to the wall with a minimum distance to the panel that is already stuck. Start the second row with an offset of ½ or ¾ so that the cut edges are not all on one level.

Tip: Trim the last row with a hand-held circular saw or a table saw to avoid possible waves in the wood and to get a nice flow of the cut edges.

button

5. finish

Finally, you can hide the cut edges of the wall covering with a wooden or aluminium strip. Again, place a few glue dots in corners with the assembly glue and apply a little pressure to make the moulding fit snugly.

Helpful Videos

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Before gluing the wall covering, the substrate must be load-bearing, clean, dry and even. Prime the substrate so that a permanent bond to the wall can be created. In the next step, mark the area to be glued with a pencil and a spirit level. Make sure that there is a gap of approx. 2-3 mm between the flooringor ceiling and the wall covering.

ATTENTION: The wall covering is not suitable for gluing it to a wallpaper!

button

2. acclimatisation

The wooden planks should be stored horizontally in the room in which they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise the room temperature and it will not "work" as much after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. preparation

Open several cartons at the same time and use panels mixed from different cartons to achieve an appealing look. For the time being, lay out the first row provisionally without mounting adhesive. Now make marks on the cut edges of the planks and cut them on the back with a chop saw or jigsaw.

Tip: If you only want to lay half a wall, you can attach tacks to the wall for support. These can be removed after the installation adhesive has dried.

button

4. glue the panels

Now start gluing the planks from left to right. Spread about 6-7 dots of the mounting adhesive on the back of the first panel. Then press the panel firmly against the wall. Pay attention to the set markings on the wall. The other panels are also attached to the wall with a minimum distance to the panel that is already stuck. Start the second row with an offset of ½ or ¾ so that the cut edges are not all on one level.

Tip: Trim the last row with a hand-held circular saw or a table saw to avoid possible waves in the wood and to get a nice flow of the cut edges.

button

5. finish

Finally, you can hide the cut edges of the wall covering with a wooden or aluminium strip. Again, place a few glue dots in corners with the assembly glue and apply a little pressure to make the moulding fit snugly.

Wall panelling wood planeo Woodwall Easyfix - oak nature

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

DIY step by step

Buy wood facing wall cladding - planeo Indo

Redesign walls in the living room with planeo wood facing

Antique wooden cladding planeo Indo

Wall subfloor test subfloor preparation for wall cladding

planeo wood facing - wall panelling - wall coverings - bathroom wall renovation

Bathroom redesign - renovate floor and walls in old bathroom with planeo

Wall cladding in concrete look

Self-adhesive wall cladding on chipboard