MSRP 106,08 €

Package price (1,02 m²): 88,64 €

MSRP 104,00 €

Price 1 m²: 86,90 €

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Skaben WoodWall - Teakwood Cube Java

Premium wall panelling made from handcrafted teak

Item no.: SWW-6207011

Exclusively designed wooden panelling for special wall surfaces.
Handcrafted surface finish for a perfect look.
Noble teak or elaborately restored driftwood.
Accents with Skaben WoodWall wall panelling offer maximum attention for the eye.
Ideal for partial surfaces or entire wall areas.

Exclusively designed wooden panelling for special wall surfaces.
Handcrafted surface finish for a perfect look.
Noble teak or elaborately restored driftwood.
Accents with Skaben WoodWall wall panelling offer maximum attention for the eye.
Ideal for partial surfaces or entire wall areas.

Offer request

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

You can easily create maximum attention for selected wall areas with Skaben WoodWall. The warm wood panelling is a convincing counterpart to natural stone wall cladding.

Handmade
Unique design
Sustainable & environmentally conscious

When selecting and installing, please note that Skaben WoodWall real wood panelling is a natural product and can react to external conditions such as moisture and dryness.

Skaben

Skaben-Bodenbeläge für höchste Ansprüche:

Vinylboden von Skaben:
Authentische Holzoptik, Robustheit und Pflegeleichtigkeit zeichnen Skaben-Vinylböden aus. Die breite Auswahl an Designs ermöglicht es, den Boden perfekt an den eigenen Stil anzupassen.
Designboden von Skaben:
Innovation und individuelles Design treffen auf höchsten Gehkomfort. Skaben-Designboden bietet eine vielfältige Palette an Oberflächenstrukturen und Designs für eine einzigartige Raumgestaltung.
Laminat von Skaben:
Natürliche Holzoptik und höchste Qualität charakterisieren Skaben-Laminat. Strapazierfähig, langlebig und pflegeleicht, ist Skaben-Laminat die ideale Wahl für stilvolle Böden in Ihrem Zuhause.
Parkett von Skaben:
Die Eleganz von echtem Holz findet sich in den Parkettböden von Skaben. Mit verschiedenen Holzarten und Oberflächenstrukturen ermöglicht Skaben-Parkett eine klassische und zeitlose Raumgestaltung.

item no.: SWW-6207011

elegant design
handmade
Real wood
eye-catcher
splinter-free

Technical data

item no.	SWW-6207011
Manufacturer	Skaben
Length in mm	552
Width in mm	184
Thickness in mm	20
Material	Wood
suitable for	Bedroom & living room, Hallway & Corridor
Installation type	glue
Look	Wood effect
Wood type	Teak
Special features	Reclaimed wood, Handmade
EAN	4062212203279
Weight	4,08 kg / Packing
Colour	brown
Type	Wood cladding
Piece per package	10
Collection	WoodWall
Shipping group	M
Format	55,2 x 18,4 cm
Package Content	1,02 m²

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Before gluing the wall covering, the substrate must be load-bearing, clean, dry and even. Prime the substrate so that a permanent bond to the wall can be created. In the next step, mark the area to be glued with a pencil and a spirit level. Make sure that there is a gap of approx. 2-3 mm between the flooringor ceiling and the wall covering.

ATTENTION: The wall covering is not suitable for gluing it to a wallpaper!

button

2. acclimatisation

The wooden planks should be stored horizontally in the room in which they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise the room temperature and it will not "work" as much after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. preparation

Open several cartons at the same time and use panels mixed from different cartons to achieve an appealing look. For the time being, lay out the first row provisionally without mounting adhesive. Now make marks on the cut edges of the planks and cut them on the back with a chop saw or jigsaw.

Tip: If you only want to lay half a wall, you can attach tacks to the wall for support. These can be removed after the installation adhesive has dried.

button

4. glue the panels

Now start gluing the planks from left to right. Spread about 6-7 dots of the mounting adhesive on the back of the first panel. Then press the panel firmly against the wall. Pay attention to the set markings on the wall. The other panels are also attached to the wall with a minimum distance to the panel that is already stuck. Start the second row with an offset of ½ or ¾ so that the cut edges are not all on one level.

Tip: Trim the last row with a hand-held circular saw or a table saw to avoid possible waves in the wood and to get a nice flow of the cut edges.

button

5. finish

Finally, you can hide the cut edges of the wall covering with a wooden or aluminium strip. Again, place a few glue dots in corners with the assembly glue and apply a little pressure to make the moulding fit snugly.

Helpful Videos

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Before gluing the wall covering, the substrate must be load-bearing, clean, dry and even. Prime the substrate so that a permanent bond to the wall can be created. In the next step, mark the area to be glued with a pencil and a spirit level. Make sure that there is a gap of approx. 2-3 mm between the flooringor ceiling and the wall covering.

ATTENTION: The wall covering is not suitable for gluing it to a wallpaper!

button

2. acclimatisation

The wooden planks should be stored horizontally in the room in which they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise the room temperature and it will not "work" as much after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button

3. preparation

Open several cartons at the same time and use panels mixed from different cartons to achieve an appealing look. For the time being, lay out the first row provisionally without mounting adhesive. Now make marks on the cut edges of the planks and cut them on the back with a chop saw or jigsaw.

Tip: If you only want to lay half a wall, you can attach tacks to the wall for support. These can be removed after the installation adhesive has dried.

button

4. glue the panels

Now start gluing the planks from left to right. Spread about 6-7 dots of the mounting adhesive on the back of the first panel. Then press the panel firmly against the wall. Pay attention to the set markings on the wall. The other panels are also attached to the wall with a minimum distance to the panel that is already stuck. Start the second row with an offset of ½ or ¾ so that the cut edges are not all on one level.

Tip: Trim the last row with a hand-held circular saw or a table saw to avoid possible waves in the wood and to get a nice flow of the cut edges.

button

5. finish

Finally, you can hide the cut edges of the wall covering with a wooden or aluminium strip. Again, place a few glue dots in corners with the assembly glue and apply a little pressure to make the moulding fit snugly.

Skaben WoodWall - Teakwood Cube Java

Product description

Skaben-Bodenbeläge für höchste Ansprüche:

Technical data

DIY step by step

Helpful Videos

DIY step by step

Buy wood facing wall cladding - planeo Indo

Redesign walls in the living room with planeo wood facing

Antique wooden cladding planeo Indo

Wall subfloor test subfloor preparation for wall cladding

planeo wood facing - wall panelling - wall coverings - bathroom wall renovation

Bathroom redesign - renovate floor and walls in old bathroom with planeo

Wall cladding in concrete look

Self-adhesive wall cladding on chipboard