Article no more available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

planeo special joint compound 5kg bucket grey

Cementitious system grout for planeo DIYTile tiles

Item no.: pf10805-70

Reduced water absorption.
High abrasion resistance.
Very high flank adhesion.
Highly deformable.
Water and dirt repellent.
Suitable for 3 - 8 mm joint width.

For interior use only - not approved for permanent wet areas!

Request alternative

Description

Technical data

Product description

Mixing ratio

1kg - special joint compound : 150ml water

Working time:

20 min. at above 23°C and 50% relative humidity.

planeo

planeo is the brand for professional solutions with tested quality. In our extensive range, you will find first-class products for home and garden, from floors to wall coverings to decking: we offer you suitable items with a top price-performance ratio for almost every requirement and budget. We also have product lines such as carpets, wall paints, wallpapers and doors. The range of attractive offers for walls, floors and patios is rounded out by high-quality accessories and effective cleaning and maintenance products. Meanwhile, planeo's services go beyond the trade in floor coverings. We put great emphasis on the idea of service in everything we do. We deal with the topics of material, handling and realisation in such detail that we can provide you with an adequate solution for many different situations on the building site. To make things more clear, you can find useful tips and instructions in our guides with articles and videos. Beautiful flooring and more? Realise easily with planeo.

item no.: pf10805-70

Technical data

item no.	pf10805-70
Weight	5,00 kg / Packing
Manufacturer	planeo
EAN	4062212062111
Shipping group	XS
Package Content	1 Pc

Downloads

planeo Spezialfugenmasse Produktbeschreibung

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

The substrate should be permanently dry, load-bearing and even. Any unevenness should be sanded down and filled with a floor levelling compound.

ATTENTION: Observe the tolerance value of max. 2 mm per linear metre, so that the butt edges of the tiles remain nice and even. The surface to be laid can now be cleaned with a hoover.

The tiles should be stored in the room where they are to be laid for at least 24 hours before installation. This will allow the material to acclimatise to the room temperature and it will not "work" so hard after the installation.

button

2. installation planning

Measure the room exactly and plan the installation. To do this, you can determine the centre of the room with the help of a chalk line. Then mark the starting line.

Before laying the flooring, it is imperative that you follow the official laying instructions that are included in every package, otherwise any claim under warranty and guarantee will be invalidated!

button

3. laying instructions

Now you can start laying the tiles. To do this, place the first tile well aligned with the markings. With the help of a suction cup, the other tiles are laid along the markings. As soon as the first strip is in place, the next tiles can be laid butt to butt with the tiles already in place.

ATTENTION: A distance of at least 8 mm must always be maintained between the flooring and the wall as well as to all fixed components.

button

4. grouting

Mix the joint provided for this purpose, taking into account the mixing ratios. The joint can then be filled into the spaces between the tiles using a spatula or trowel. Fill up to two rows at a time and wipe off the joint with a sponge board. When doing this, wipe against the joint so that the compound can spread well in the gaps.

button

5. finish

Finally, the skirting boards can be fitted.