We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
The self-adhesive Senso Premium planks have an extra strong adhesive layer and an extra strong construction to simplify the installation, but also to give you a long-lasting benefit from the Gerflor vinyl floor.
- Reinforced construction The dimensionally stable vinyl floors from the Senso Premium collection are equipped with an integrated fabric net, which provides more stability and resists deformation.
- Easy installation Thanks to a successful and well thought-out system, installation is flush and, as Senso Premium Vinyl is self-adhesive, it can also be installed quickly.
- Easy-care and antistatic
Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.
|Length in mm||1219|
|Width in mm||184|
|Thickness in mm||2.5|
|suitable for||Private, Bath, Kitchen, Bedroom & living room|
|installation pattern||Plank pattern (1-plank)|
|Underfloor heating||Warmwasser-FBH geeignet|
|Piece per package||11|
|Wear layer||0,30 mm|
|Package Content||2.47 m²|
Show all data ▼
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
The substrate should be permanently dry, load-bearing and even. Any unevenness is sanded down and filled with a floor levelling compound. Depending on the substrate, the preparation procedure may vary. Please check the installation instructions to see which preparation is necessary for your subfloor. The surface to be laid can then be cleaned with a hoover.
The vinyl planks should be stored horizontally in the room in which they are to be installed for at least 24 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.
Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!
Apply the bonding primer to the substrate in preparation for bonding to improve adhesion.
Tip: To achieve as uniform a floor appearance as possible, it is recommended to install panels mixed from different packages.
You can start with the installation on the left side of the room or in the middle of the room. First remove the protective foil and lay the first plank well aligned on the subfloor. Now press the plank firmly into place. The next planks are laid butt to butt with the planks already in place. Please note the laying direction on the back of the planks. To cut a plank, now take measurements and set the marks. Then take an angle and tear the plank with a cutter knife and break it off.
Attention: A distance of approx. 5 mm must always be maintained between the flooring and the wall as well as to all fixed components.
- Self-adhesive floor tiles
- Primer: 5720001
- Professional cutter knife
- Metal ruler
- Measuring tape
- approx. 2-3 hours for a room size of 15-20 m².
Level of difficulty:
Are you looking for a lower price? Just ask us for an individual offer!