The self-adhesive Prime planks have an extra strong adhesive layer to simplify installation, but also to ensure that you get long-lasting benefits from Gerflor vinyl flooring.
Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.
| item no. | 45560002 |
|---|---|
| Manufacturer | Gerflor |
| Collection | Prime |
| Length in mm | 305 |
| Width in mm | 305 |
| Thickness in mm | 1.3 |
| Wear layer | 0,08 mm |
| Wear class | 22 Residential (moderate) |
| suitable for | Private, Bath, Bedroom & living room |
| installation pattern | Tile format |
| Installation type | self-adhesive |
| Sorting (grain) | calm/elegant |
| Look | Stone effect |
| Warranty | 3 Jahre Privat |
| Special features | Suitable for humid rooms, Waterproof |
| EAN | 3475710432293 |
| Structure | Full vinyl |
| Joint | No bevel |
| Style | Modern |
| Slip resistance | R10 |
| Shipping group | M |
| Colour | grey |
| Range of application | Residential |
| Underfloor heating | Hydronic UFH compatible |
| Weight | 2,19 kg/Packing |
| Package Content | 5 m² |
|
Show all data ▼
|
|
| Downloads |
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
button
The substrate should be permanently dry, load-bearing and even. Any unevenness is sanded down and filled with a floor levelling compound. Depending on the substrate, the preparation procedure may vary. Please check the installation instructions to see which preparation is necessary for your subfloor. The surface to be laid can then be cleaned with a hoover.
button
The vinyl planks should be stored horizontally in the room in which they are to be installed for at least 24 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.
Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!
button
Apply the bonding primer to the substrate in preparation for bonding to improve adhesion.
Tip: To achieve as uniform a floor appearance as possible, it is recommended to install panels mixed from different packages.
button
You can start with the installation on the left side of the room or in the middle of the room. First remove the protective foil and lay the first plank well aligned on the subfloor. Now press the plank firmly into place. The next planks are laid butt to butt with the planks already in place. Please note the laying direction on the back of the planks. To cut a plank, now take measurements and set the marks. Then take an angle and tear the plank with a cutter knife and break it off.
Attention: A distance of approx. 5 mm must always be maintained between the flooring and the wall as well as to all fixed components.
Material:
Tools:
optional:
Working time:
Level of difficulty:
.
Are you looking for a lower price? Just ask us for an individual offer!