planeo roof window pleated blind + insect screen - white 100 x 160 cm

To determine the right order size for the planeo pleated blind, please note the following information:

General pleated blind dimensions:
The specified size is the exact size of both the system and the fabric. Pleated blinds can easily be shortened in width. It is not necessary to shorten the height, as the fabric is distributed almost evenly over the entire system.

There are two fabrics in this system; a room-darkening honeycomb fabric and an insect screen fabric. The room-darkening fabric is made of 100% polyester and is called Honeycomb because of its cell structure. Due to the cell structure and the silver layer on the inside of the cells, it has an excellent insulating effect. The insect screen part is made of polyethylene and PET. The top and bottom rails and the side guides are made of aluminium. The fastening hooks are made of plastic.

These pleated insect screens are supplied with aluminium side guides, mounting hooks and cover caps. The screws and an Allen key are also included as standard. The pre-drilled fixing hooks make this pleated insect screen very easy to install. This system is childproof from the outset.

Installation in the window recess:
Hang the pleated blind in the frame.

Determine size:
• Width: Measure the width of the frame at the top, centre and bottom. Order the smallest measurement minus 1 cm. A maximum of 7.5 cm per side may be shortened at the top and bottom profile (15 cm in total).
• Height: Measure the height of the frame on both the left and right side. Order the highest measured height.