planeo INFINITY XL-Board – WPC CoEx front garden slatted fence, 180 x 90 cm

The planeo INFINITY XL-Board front garden and picket fence stands out thanks to its extra-wide profiles, which create a spacious, flat and modern look with few joints.

Advantages over wooden fences:

with CoEx protective coating

The co-extrudedwood-polymer compositefence panels are fully coated and more resistant to scratches and dirt than standard fence panels. Their structure has been enhanced by thicker outer walls and additional hollow chambers. Furthermore, the material composition is further strengthened by additional additives. This makes them more durable and robust.

Maintenance-free and resistant

CoEx privacy fences offer high resistance to moisture, insects and fungal attack. There is no need for annual maintenance such as re-oiling or painting the fence panels. The profiles are extremely dimensionally stable and splinter-free.

Easy to maintain and weather-resistant

Changing weather conditions and UV radiation have little effect on the privacy fencing. The robust cladding is easy to clean with lukewarm water, a brush or a pressure washer.

Sustainably manufactured from recycled wood fibres and plastics

The CoEx fence panels have a WPC core consisting of a mixture of wood and polymer.

Included in the set (180 x 90 cm):

• 3x panels
• 1x end profile with clip
• 1x starter profile
• 2x spacers
• Screws

For one panel (180 x 90 cm), you will need:

• 3x post cover strips*
• Setting in concrete: 2 x 150 cm posts
• Anchoring with dowels: 2 x 100 cm posts + post anchors
• 1 additional post for each further fence panel

*For corner installation, there are 3 grooved sides on the aluminium post available for single-profile mounting. This means that the open grooves can be covered with the post cover strips

The posts are not included in the set and should be ordered separately.

If the fence height exceeds 183 cm, no guarantee can be given against storm damage!

Note: Please be aware that dimensional variations may occur due to the manufacturing process. The tolerances per panel are ±5 mm in height and ±0.5 mm in thickness.