We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
The design floor as an attractive plank combines comfort, appearance and sustainability. The innovative, multi-layer construction contains:
- a hard-wearing, PVC-free PUR surface , which is excellently designed for high-traffic rooms and reduces walking noise with SilentTouch. It is particularly easy to clean & hygienic and creates a natural wood look.
- a special AquaSafe board, which prevents swelling due to moisture penetration and is made from renewable raw materials (Blue Angel & PEFC seal). The counter-move in the bottom layer ensures
- optimum dimensional stability
The Meister flex series is presented in the DD 400 version as a country house plank in various warm and natural wood designs and in the DB 400 version in tile look with stone decors. This variety gives each of your rooms an individual touch. You are sure to find something to suit your taste and interior design style.
Meister stands up for its good name and gives a guarantee of
- all-round micro joint
- quiet and warm underfoot
- no harmful plasticisers, PVC-free
- easy to lay thanks to MulticlicPlus
- Blue Angel
MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.
|Collection variant||DD 400 / DB 400|
|Length in mm||1290|
|Width in mm||216|
|Thickness in mm||5|
|Warranty||25 Jahre Privat, 5 Jahre Gewerbe|
|suitable for||Private, Business, Bedroom & living room, Hallway & Corridor|
|installation pattern||Plank pattern (1-plank)|
|Underfloor heating||Warmwasser-FBH geeignet|
|Special features||Blue Angel, PVC-free|
|Piece per package||12|
|Package Content||3.34 m²|
Show all data ▼
|Meister Designboden DD 400 - Datenblatt|
|Meister Fußboden Verlege- und Pflegeanleitung|
|Meister Designboden auf Fußbodenheizung - Hinweise|
|elektrische Fußbodenheizung - Hinweise|
|Meister Designboden / Nadura / Laminat - Garantiebedingungen|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 9pm
Sat: 9am - 2pm
Variant: DIY Instruction
Check the subfloor. Any unevenness that exceeds 3 mm over a length of 1 m should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.
CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.
The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.
Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!
Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.
Tips for the UniClic system: To achieve as uniform a floor appearance as possible, it is recommended to install panels from different packages mixed together. You should start laying in a corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, the plank is placed at an angle to the end face of the row already laid and folded down. While folding down, the long side of the plank is clicked into the existing plank. With a little pressure, the click joints now snap into place. The transverse joints (front side) should be offset by at least 30 cm from row to row ("wild bond", half a plank length for tile formats). You can use a tapping block and a light tap on the long side of the plank to help it along. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a multi-purpose knife/cutter and break it off.
Place the spacers on walls, door frames, fixed wall cabinets, kitchen units, etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.
Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.
- Click vinyl flooring
- Impact sound insulation
- Cutter knife
- Rubber mallet
- Measuring tape
- Skirting boards
- PE vapour barrier*
- for a room size of 15-20 m² approx. 4-5 hrs.
*required for floors with HDF core board and cork impact sound insulation
Are you looking for a lower price? Just ask us for an individual offer!