MSRP 150,38 €

Package price (1,98 m²): 79,00 €

MSRP 75,94 €

Price 1 m²: 39,90 €

VAT included plus. 83,90 € shipping costs for deliveries to DE

L

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

MEISTER Organic Flooring - MeisterDesign comfort DD 600S / DB 600S Stone oak pure (400001-1287220-06985)

33 Commercial (heavy) - Vinyl with cork underlay - Beveled edge (4 sides) - Wood effect - Plank pattern - brown

Item no.: 5961006985

For dry living areas, especially children's rooms.
Cork comfort layer for more living comfort.
Suitable for hot water underfloor heating.
Integrated cork impact sound insulation.
Resistant Puretec Plus surface.
Awarded the Blue Angel.

For dry living areas, especially children's rooms.
Cork comfort layer for more living comfort.
Suitable for hot water underfloor heating.
Integrated cork impact sound insulation.
Resistant Puretec Plus surface.
Awarded the Blue Angel.

Offer request

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

The design floor as a wideplank in natural wood imitation combines comfort, appearance and sustainability. The innovative, multi-layer construction contains:

A hard-wearing surface
A cork comfort layer
A special AquaSafe board
An integrated cork impact sound insulation,

which makes the floor particularly quiet.

The Meister comfort range is available in the DL 600S version as a wideplank in various authentic wood reproductions and in the DB600S version in tile format with stone decors. This variety gives each of your rooms an individual touch. You are sure to find something to suit your taste and interior design style.

Meister stands up for its good name and gives a guarantee of

25 years for the living area

and 5 years in the commercial sector

MEISTER

MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.

item no.: 5961006985

Easy on the joints
all-round micro joint
no harmful softeners
PVC-free
easy to install MaxiclicPlus
Blue Angel
Synchronous embossing

Technical data

item no.	5961006985
Manufacturer	MEISTER
Collection	MeisterDesign comfort
Collection variant	DD 600S / DB 600S
Length in mm	1287
Width in mm	220
Thickness in mm	9
Wear class	33 Commercial (heavy)
Joint	Beveled edge (4 sides)
Warranty	25 Jahre Privat, 5 Jahre Gewerbe
suitable for	Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Look	Wood effect
Sorting (grain)	natural/classic
Special features	Integrated impact sound, Blue Angel, PVC-free, Synchronous embossing
EAN	4011138402488
Piece per package	7
Structure	HDF + Korkunterlage
Slip resistance	R9
Shipping group	L
Weight	15,90 kg / Packing
Colour	brown
Range of application	Residential, Commercial
Click variant	UniClic
Underfloor heating	Hydronic UFH compatible
Package Content	1,98 m²

Print page

DIY step by step

Variant: DIY Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness that exceeds 3 mm over a length of 1 m should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. installation instructions

Tips for the UniClic system: To achieve as uniform a floor appearance as possible, it is recommended to install panels from different packages mixed together. You should start laying in a corner (left) and starting from the wall. With the tongue side facing the wall, lay the first board. Angle the end of the second board into the first. In the second row, the plank is placed at an angle to the end face of the row already laid and folded down. As the board is folded down, the long side of the board will click into the existing board at an angle. With a little pressure, the click joints now snap into place. The transverse joints (front side) should be offset by at least 30 cm from row to row ("wild bond", half a plank length for tile formats). You can use a tapping block and a light tap on the long side of the plank to help it along. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a multi-purpose knife/cutter and break it off.

button

5. finishing the last row

Place the spacers on walls, door frames, fixed wall cabinets, kitchen units, etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

Helpful Videos

DIY step by step

Variant: DIY Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness that exceeds 3 mm over a length of 1 m should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. installation instructions

Tips for the UniClic system: To achieve as uniform a floor appearance as possible, it is recommended to install panels from different packages mixed together. You should start laying in a corner (left) and starting from the wall. With the tongue side facing the wall, lay the first board. Angle the end of the second board into the first. In the second row, the plank is placed at an angle to the end face of the row already laid and folded down. As the board is folded down, the long side of the board will click into the existing board at an angle. With a little pressure, the click joints now snap into place. The transverse joints (front side) should be offset by at least 30 cm from row to row ("wild bond", half a plank length for tile formats). You can use a tapping block and a light tap on the long side of the plank to help it along. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a multi-purpose knife/cutter and break it off.

button

5. finishing the last row

Place the spacers on walls, door frames, fixed wall cabinets, kitchen units, etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

MEISTER Organic Flooring - MeisterDesign comfort DD 600S / DB 600S Stone oak pure (400001-1287220-06985)

We recommend the following accessories

Product description

Technical data

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?