We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
Senso Premium Easy from Gerflor has an anti-slip underside. In addition, the vinyl planks are super sealed and can therefore also be used in damp rooms.
Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.
item no. | 36170385 |
---|---|
Manufacturer | Gerflor |
Collection | Senso Premium Easy |
Length in mm | 1219 |
Width in mm | 184 |
Thickness in mm | 4 |
Wear layer | 0,55 mm |
Wear class | 42 Industrial (moderate) |
suitable for | Bath, Kitchen, Bedroom & living room, Hallway & Corridor |
Installation type | loose-laying |
installation pattern | Plank pattern (1-plank) |
Look | Wood effect |
Underfloor heating | suitable |
EAN | 3475710438011 |
Structure | Full vinyl |
Joint | Micro bevel |
Piece per package | 8 |
Slip resistance | R9 |
Shipping group | M |
Colour | beige |
Range of application | Residential, Commercial, Industrial |
Style | Classic |
Weight | 12,89 kg/Packing |
Package Content | 1.79 m² |
Show all data ▼
|
|
Downloads | |
![]() |
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
The substrate should be permanently dry, load-bearing, level and firmly bonded. Clean the surface to be installed with a hoover.
CAUTION: Never install vinyl over laminate or a soft subfloor e.g. carpet, cork or any type of foam underlay.
The vinyl planks should be stored horizontally in the room in which it is to be installed for 24-72 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.
Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!
The next step is to stick on the tape strips. Please always follow the installation instructions here as well, as this step can vary depending on the manufacturer. The edge areas are taped off to fix the vinyl planks. The strips can now be rolled on so that any air bubbles that have formed can be released and the planks get a firm hold.
Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.
Once the tapes are firmly stuck down, you can remove the foil from the tape strip for the first row. Now you can start laying in one corner (left) and starting from the wall. Hold the right side of the vinyl plank slightly higher than the left side and tape the plank to the tape, following the arrows. For the next planks, make sure that they are laid butt to butt with the planks already in place and that the ends are flush. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a cutter knife. Before cutting, remove the protective film from the back of the plank.
Attention: A distance of approx. 1 cm must always be maintained between the flooring and the wall as well as to all fixed components.
Material:
Tools:
optional:
Working time:
Level of difficulty:
Laying vinyl flooring loose - Loose Lay Vinyl
Laying vinyl flooring on tiles, how wide and deep can the joint be?
Laying the floor on the heating pipe
Subfloor testing before laying flooring
Shorten door frames
Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?
Are you looking for a lower price? Just ask us for an individual offer!