Package price (1 Set): 2.709,00 €

Price 1 Set: 2.709,00 €

VAT included plus. 199,90 € shipping costs for deliveries to DE

XL 2

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Complete set TitanWood 3m hollow core plank grooved structure light grey 40.2m² incl. Alu-UK

Name: Complete set TitanWood 3m hollow core plank grooved structure light grey 40.2m² incl. Alu-UK
Brand: TitanWood
SKU: HGH-3GG-40qal
Price: 2709 EUR
Availability: InStock

incl. aluminium substructure and the practical clips+screws

Item no.: HGH-3GG-40qal

Our practical complete set includes:

90 x 3m hollow core planks (22mm x 145mm).
47 x aluminium substructure (29mm x 49mm x 2900mm).
9 x pack of screws & centre clips (pack of 100).
2 x pack of start and end clips (pack of 15).
13 x rolls of EPDM tape.
All dimensions given are approximate.

TitanWood WPC decking offers the highest standards and is more robust and durable than traditional WPC decking.

Ultra-high density material composition.
Water absorption rate less than 1%.
High impact resistance - 18kJ/m².
Moisture resistance.

Our practical complete set includes:

90 x 3m hollow core planks (22mm x 145mm).
47 x aluminium substructure (29mm x 49mm x 2900mm).
9 x pack of screws & centre clips (pack of 100).
2 x pack of start and end clips (pack of 15).
13 x rolls of EPDM tape.
All dimensions given are approximate.

TitanWood WPC decking offers the highest standards and is more robust and durable than traditional WPC decking.

Ultra-high density material composition.
Water absorption rate less than 1%.
High impact resistance - 18kJ/m².
Moisture resistance.

Offer request

Description

Technical data

We recommend the following accessories

Product description

The TITANWOODWPC plank, which is only available from planeo , surpasses the material of conventional WPC in every respect and achieves top values that exceed the European standard EN15534.

The best plank on the market
Does not break as quickly
Bends less
Environmentally friendly & durable
More water resistant

Please note: Fluctuating colour variations between the WPC planks are due to the material and production. After some time of weathering, the colours will even out.

TitanWood

Compared to first generation WPC, TitanWood brand planks are clearly superior. The WPC decking boards test according to EN standard 15534 shows: TitanWood is more resilient, easier to maintain, more durable, more impact resistant and more moisture resistant than conventional WPC boards. With a 2.5 higher load-bearing capacity, the high-density TitanWood WPC exceeds the load values specified by the Euro standard for composite materials such as WPC decking boards. With TitanWood, you get a particularly high-quality product in guaranteed long-lasting quality - far beyond the European standard.

item no.: HGH-3GG-40qal

non-splintering & anti-slip
environmentally friendly
weatherproof
low-maintenance
incl. aluminium substructure

Technical data

item no.	HGH-3GG-40qal
Manufacturer	TitanWood
Colour	light grey
Type	Clip system
EAN	4260387687294
Profiles	Twin-wall plank
suitable for	Terrace
Look	Wood effect
Special features	Reversible
Material	WPC / BPC
Plank length	3m
Top / bottom	grooved (fine)/grooved
Thickness in mm	22
Shipping group	XL 2
Surface / Texture	Grooved
Package Content	1 Set

Print page

DIY step by step

Variant: Renew existing terrace

button

1. determine the installation height for WPC composite decking boards

First determine the total construction height of the WPC composite decking boards to be installed. The terrace construction consists of the substructure (chippings, weed fleece, lawn edges) and the terrace construction (terrace pad, substructure, WPC planks). Check whether existing edges of the old terrace can be used for the necessary height. Tighten cords to be able to measure the heights. Also take into account the slope of 2% away from the house.

button

2. chippings - creating the basis for the new terrace construction

Spread chippings on the compacted gravel roughly with a wheelbarrow and shovel. Level the surface with a spirit level on two long metal poles embedded in the chippings. Check the required construction height and the slope with at least two taut strings. Start in one corner and work your way through the entire area, one row at a time.

button

3. lay out weed fleece and kerbstones

First roll out a sheet of weed mat, starting from the outer edge. In the next step, immediately lay the kerb stones on top with a distance of 2 cm from the edge of the patio. A homemade template as a spacer makes it easier to lay the subsequent kerbstones on the fleece. Where higher loads are to be expected on the terrace, you should place the kerbstones closer together.

button

4. laying the terrace WPC substructure correctly

The WPC substructure requires 2cm edge distance in all directions. The parallel distances of the WPC substructure should be between 30-40cm. Mark the exact positions with a chalk line. Lay out the substructure on decking pads. Bridge the joints parallel to each other with a piece of substructure. Always check and correct the evenness of the surface with a spirit level during installation. Dowel all ends of the substructure around the edge of the terrace and on the surface. Reinforce the joints of the WPC composite decking boards with additional substructure so that the ends do not hang more than 5 cm freely in the air. Now stick the supplied EPDM spacer tape onto the full length of each substructure.

button

5. plan and install terrace lighting

Mark all planned lamp positions before you start laying the boards. Unroll the 12V cabling completely along the markings. Leave the cable ends freely accessible and cover unused ones with caps. Then install the lamps completely and at the same time as laying the floorboards. Drill the appropriate holes and bring the connectors into contact with the laid-out cable. Check the lamps immediately for proper function. Finally, clamp the cable to the transformer and position it in the floor tank or near a socket. Use a safebox if the socket is in the ground.

button

6. lay the WPC Titanwood decking boards. Done!

To start laying the composite decking boards, first screw the starting clips onto each substructure with a distance of 2 cm to the wall. Then lay the composite decking boards and shorten them if necessary. Then position the centre clip, pre-drill and fix the composite decking boards to each substructure with the stainless steel screws provided. Make sure you use the correct torque on the cordless screwdriver. Refer to the installation instructions for the correct spacing at the head joints. Cut the last row of WPC composite boards lengthwise with a circular saw. Pre-drill them and screw them to each substructure. Now you can enjoy your new Titanwood terrace.