MSRP 111,90 €

Package price (6 linear meter): 98,70 €

Price 1 linear meter: 16,45 €

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

planeo CoEx-Line BPC solid plank walnut/black-brown - wood structure

Fully encased Co-Ex 360° protection for long service life

Item no.: COEX-WS_conf

TitanShield 360° protection.
4-sided sheathed BPC solid plank in premium quality.
Made of an innovative wood-plastic mixture.
Particularly barefoot-friendly.
Resistant to fungal and insect attack.
7 running metres make approx. 1 m² surface.

Top/bottom in 2 colours. When ordering, please state the visible side in the order comment ! (Shopping cart->Go to checkout->Order overview->Order comment)

Offer request

Description

Technical data

DIY - Videos

Product description

TitanShield 360° protection.
4-sided sheathed BPC solid plank in premium quality.
Made of an innovative wood-plastic mixture.
Particularly barefoot-friendly.
Resistant to fungal and insect attack.
7 running metres make approx. 1 m² surface.

Top/bottom in 2 colours. When ordering, please state the visible side in the order comment ! (Shopping cart->Go to checkout->Order overview->Order comment)

Decking boards made of innovative bamboo wood-plastic blend BPC have an unmistakable grain pattern. They look and feel like grown wood. The abbreviation BPC stands for Bamboo Plastic Composites.

The innovative BPC composite consists of:

60% wood components
35% thermoplastics
5% material-retaining additives

The 360° TitanShield again provides maximum protection against:

Fading of the floorboards

Penetration of water and dirt

Cracking and splintering of the floorboard

Stains and scratches

Mould and rotting due to fungal attack

As is usual with wood-plastic mixtures, electrostatic charging cannot be completely ruled out in unfavourable ambient conditions.

planeo

planeo is the brand for professional solutions with tested quality. In our extensive range, you will find first-class products for home and garden, from floors to wall coverings to decking: we offer you suitable items with a top price-performance ratio for almost every requirement and budget. We also have product lines such as carpets, wall paints, wallpapers and doors. The range of attractive offers for walls, floors and patios is rounded out by high-quality accessories and effective cleaning and maintenance products. Meanwhile, planeo's services go beyond the trade in floor coverings. We put great emphasis on the idea of service in everything we do. We deal with the topics of material, handling and realisation in such detail that we can provide you with an adequate solution for many different situations on the building site. To make things more clear, you can find useful tips and instructions in our guides with articles and videos. Beautiful flooring and more? Realise easily with planeo.

item no.: COEX-WS_conf

shatterproof
anti-slip
robust
weatherproof
low maintenance

Technical data

item no.	COEX-WS_conf
Special features	Coex-jacketed
suitable for	Pool surround
Look	Wood effect
Width in mm	140
Collection	CoEx-Line
Shipping group	XL
Manufacturer	planeo
Material	WPC / BPC
Top / bottom	structured/brushed
Profiles	Solid plank
Thickness in mm	20
Type	Clip system

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. determine the installation height

First, determine the total construction height of the WPC composite decking boards to be installed. The terrace construction consists of the substructure (chippings, weed fleece, lawn edges) and the terrace construction (terrace pad, substructure, WPC plank). Check whether existing edges of the old terrace can be used for the necessary height. Tighten cords to be able to measure the heights. Also take into account the slope of 2% away from the house.

button

2. subfloor preparation

Spread chippings on the compacted gravel roughly with a wheelbarrow and shovel. Level the surface with a spirit level on two long metal rods embedded in the chippings. Check the required construction height and slope with at least two taut strings. Start in one corner and work the entire surface in rows.

button

3. lay out weed fleece

First roll out a sheet of weed mat starting from the outer edge. Lay the curbs on the weed fleece with a distance of 2 cm to the edge of the patio. Then lay the lawn edges on top. Please note that the distance between the lawn edges should be approx. 30-40 cm.

Tip: A homemade template can serve as a spacer and make it easier to lay the subsequent lawn edges on the fleece.

button

4. laying the substructure

Before laying the substructure, it is imperative to follow the official laying instructions that are included in every package, otherwise any claim under warranty and guarantee will be invalidated!

The WPC substructure requires 2 cm edge distance in all directions. The parallel distances of the substructure should be between 30-40 cm. Mark the exact positions with a chalk line. Lay out the substructure on the composite decking pads and make sure that the substructures are not laid butt to butt, but at least 2 cm apart. All ends in the outdoor area and each end of a substructure should now be doweled. The joints of the substructures are fixed with small section bridges. Reinforce the planned joints of the WPC composite decking boards with additional substructures so that the ends do not hang more than 5 cm freely in the air. Now stick the supplied spacer tape onto each substructure.

button

5. assemble the terrace lighting

Mark all the planned lamp positions before you start laying the boards. Unroll the 12V cabling completely along the markings. Leave the cable ends freely accessible and cover unused cable ends with caps. Then install the lamps completely and at the same time as laying the floorboards. To do this, drill the appropriate holes and bring the connectors into contact with the laid-out cable. Finally, clamp the cable to the transformer and position it in the floor tank or near a socket. Use a safebox if the socket is in the ground.

Tip: Check the function of the lamps immediately after the installation.

button

6. laying the decking boards

Screw the starting clips onto each substructure with a distance of 2 cm to the wall. Lay the composite decking boards against them and shorten them if necessary. Then position the centre clip, pre-drill and fix the composite decking boards to each substructure with the stainless steel screws provided. Refer to the installation guide for the correct spacing at the head joints. Cut the last row of WPC boards lengthwise with a circular saw. Finally, pre-drill the plank and fix it with a screw.

Helpful Videos

planeo TitanWood composite decking boards installation

Differences in quality of WPC terrace boards - 8 year old WPC terrace in test

Redesign a paved terrace with planeo XXL WPC planks

Laying planeo WPC composite decking boards on old concrete slabs - renovating a terrace

Laying roof terrace flooring WPC planks from planeo

$WPC planks fracture test - standard WPC terrace planks against planeo TitanWood$

planeo CoEx-Line BPC solid plank walnut/black-brown - wood structure

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

planeo TitanWood composite decking boards installation

Differences in quality of WPC terrace boards - 8 year old WPC terrace in test

Redesign a paved terrace with planeo XXL WPC planks

Laying planeo WPC composite decking boards on old concrete slabs - renovating a terrace

Laying roof terrace flooring WPC planks from planeo

WPC planks fracture test - standard WPC terrace planks against planeo TitanWood

WPC planks in severe weather conditions in autumn

WPC composite decking boards in winter Care and handling

WPC composite decking in spring

WPC boards on aluminium substructure for heavy duty use

Quality terrace - XXL WPC composite decking installation by Planeo

Cleaning and maintaining WPC composite decking boards