If the floor is not completely even, reach for the multi-layer variant for clicking from the brand new wineo 400 collection.
- Easy installation and renovation-friendly The LocTec locking system makes laying the floor quick and easy. wineo 400 multilayer vinyl is 9 mm high and can easily compensate for any unevenness in the floor. The design floors on HDF core board are quick and easy to install. All you need is a saw. Saw it to the right size and fit it into one another, and the new floor is ready.
- Hard-wearing and easy to clean The luxury vinyl surface with PU sealing of wineo 400 as a multilayer is hard-wearing and easy to clean.
- With integrated impact sound insulation The integrated impact sound insulation of the practical multilayer vinyl ensures pleasant acoustics in the room.
- Suitable for underfloor heating and chair castors
- HDF middle layer
- easy to clean
- good room acoustics
- easy on the joints
- synchronous embossing
As a brand of the internationally active company Windmöller, wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.
|Collection variant||wood XL|
|Length in mm||1520|
|Width in mm||230|
|Thickness in mm||9|
|Wear layer||0,30 mm|
|Wear class||31 Commercial (light)|
|Warranty||15 Jahre Privat|
|suitable for||Kitchen, Bedroom & living room, Hallway & Corridor|
|installation pattern||Plank pattern (1-plank)|
|Special features||Integrated impact sound, Synchronous embossing|
|Piece per package||6|
|Range of application||Residential, Commercial|
|Package Content||2.10 m²|
Show all data ▼
|Wineo 400 Multilayer (click) - Technical data sheet EN|
|Wineo 400 (click) - Technical data sheet EN|
|Wineo 400 Multilayer (click) - Installation instruction EN|
|Wineo 400 (click) - Installation instruction EN|
|Wineo 400 Multilayer (click) - Cleaning and care instructions EN|
|Wineo 400 (click) - Cleaning and care instructions EN|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
Variant: DIY instructions
Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.
For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.
Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!
It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.
ATTENTION: When laying, keep the edge distances of 5mm.
Finally, attach the baseboards with a mounting adhesive.
- Click-vinyl with integrated impact sound insulation
- Professional cutter knife
- Pull bar
- Tapping block
- Rubber mallet
- Measuring tape
- Spirit level
- PE vapour barrier*
- 4-5 hours for a room size of approx.15-20 m².
*Required for floors with HDF core board and cork impact sound insulation
Click vinyl flooring installation guide
Laying vinyl flooring on tiles, how wide and deep can the joint be?
Laying vinyl flooring on tiles - planeo Sly
Click or stick vinyl flooring
Is click vinyl waterproof and usable in the bathroom?
Subfloor testing before laying flooring
The 10 most common mistakes when laying vinyl flooring - is it possible?
Laying vinyl flooring over old floorboards
Damp room flooring for bathrooms - sealing the floor covering
Filling uneven tiles and joints
Laying the floor on the heating pipe
Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?
Are you looking for a lower price? Just ask us for an individual offer!