Under the WICANDERS brand, high-quality floor coverings for the residential and commercial sectors have been produced since 1868. AMORIM Germany, the world market leader in cork, has won several awards for using wood from sustainably managed forests. The production of every single WICANDERS floor is carried out exclusively by certified production companies on different continents. All floor coverings carry the FSC sustainability label and are versatile products created through innovative technologies. The corktech label points to the benefits and sustainability of cork, which is included in WICANDERS floor coverings.
|Length in mm||1220|
|Width in mm||185|
|Thickness in mm||10.5|
|Wear layer||0,20 mm|
|Wear class||31 Commercial (light)|
|suitable for||Private, Business, Kitchen, Bedroom & living room, Hallway & Corridor|
|installation pattern||Plank pattern (1-plank)|
|Special features||Integrated impact sound|
|Piece per package||8|
|Package Content||1.81 m²|
Show all data ▼
|Wicanders wood Go - Technical data sheet EN|
|Wicanders wood Go - Installation instruction EN|
|Wicanders - Pflegeanleitung|
|Wicanders Corkloc 2G - Verlegeanleitung|
|Wicanders Garantiebedingungen (EN)|
|Wicanders Klebevinyl - Verlegeanleitung|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
Variant: DIY instructions
Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.
For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.
Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!
It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.
ATTENTION: When laying, keep the edge distances of 5mm.
Finally, attach the baseboards with a mounting adhesive.
- Click-vinyl with integrated impact sound insulation
- Professional cutter knife
- Pull bar
- Tapping block
- Rubber mallet
- Measuring tape
- Spirit level
- PE vapour barrier*
- 4-5 hours for a room size of approx.15-20 m².
*Required for floors with HDF core board and cork impact sound insulation
Are you looking for a lower price? Just ask us for an individual offer!