Article temporary not available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Sly Iscore Click Vinyl Multilayer - Square Sardegna (138379)

0.55 mm wear layer - 33 trades (intensive) - multilayer - bevelled edge (4-sided) - concrete look tile format white

Item no.: 138379

Chic design flooring in extra-large tile format.
Can be laid over a large area without expansion joints thanks to ISOCORE®.
Fulfils high ecological standards.
Easy to lay thanks to patented click connection.
Contains no phthalates or harmful plasticisers.

Request alternative

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

SLY SQUARE Sardegna has a discreet concrete look, giving your room a clear touch and allowing your furnishings to take centre stage.

The floor coverings from the SLY collection are available in large formats and impress with high-quality properties such as:

Water resistance

slip resistance

excellent dimensional stability

The floors are quick and easy to install thanks to the patented Droplock100 click system. The antibacterial design floors are also characterised by:

high hygienic standard

wide variety of designs

noise-reducing footfall sound integration

SLY floors ensure a high level of comfort when walking and are easy on the joints and spine. Thanks to innovative ISOCORE® technology, SLY offers maximum stability and firmness with every step.

item no.: 138379

deceptively real concrete look
easy to lay
easy on the joints
no phthalates

Technical data

item no.	138379
Length in mm	600
Width in mm	600
Thickness in mm	8
Wear layer	0,55 mm
Wear class	33 Commercial (heavy)
Joint	Beveled edge (4 sides)
Warranty	25 Jahre Privat, 5 Jahre Gewerbe
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Tile format
Installation type	click
Look	Concrete effect, Tile effect
Sorting (grain)	calm/elegant
Special features	Integrated impact sound, Pet Friendly
EAN	7640165926499
Piece per package	6
Structure	Multilayer
Slip resistance	R10
Shipping group	M
Weight	18,96 kg / Packing
Colour	white
Style	Modern
Range of application	Residential, Commercial
Click variant	DropDown
Underfloor heating	Hydronic UFH compatible
Package Content	2,16 m²

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Sly Iscore Click Vinyl Multilayer - Square Sardegna (138379)

We recommend the following accessories

Product description

Technical data

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?