Article temporary not available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

planeo Click vinyl - Rigid oak rustic (60061907-N)

0,50 mm Wear layer - 42 Industrial (moderate) - Rigid SPC - Beveled edge (4 sides) - Wood effect - Plank pattern - brown

Item no.: 60061907-N

Rigid SPC - mineral high density core board.
Absolutely waterproof and suitable for kitchens and bathrooms.
Large areas can be laid without expansion joints.
Low swelling and shrinkage behaviour.
Suitable for private and commercial use.
Phthalate-free - no harmful plasticisers.

Due to the rigid backing material, a very strong connection is created, but special attention must be paid to accuracy of fit during installation.

The click connection has been optimised for this article, meaning that the individual planks can no longer be combined directly with the previous version (60061907).

Rigid SPC - mineral high density core board.
Absolutely waterproof and suitable for kitchens and bathrooms.
Large areas can be laid without expansion joints.
Low swelling and shrinkage behaviour.
Suitable for private and commercial use.
Phthalate-free - no harmful plasticisers.

Due to the rigid backing material, a very strong connection is created, but special attention must be paid to accuracy of fit during installation.

The click connection has been optimised for this article, meaning that the individual planks can no longer be combined directly with the previous version (60061907).

Request alternative

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

Rigid Vinyl is a new development of the classic vinyl floor/design floor and is suitable for many applications. The main differences to classic vinyl flooring are the addition of stone powder in the base material. base material. They ensure very robust and rigid properties. This is why the is also known as rigid board. The rigid board improves several properties of the vinyl floor.

Low expansion and shrinkage behaviour
SPC carrier (Stone-Powder-Composite)
Resistant to deformation & dimensionally stable
enables large-area installation without expansion joints
can be laid on old floor coverings such as tiles, PVC, linoleum or old floorboards old floorboards. Joints do not "push through"!

planeo

planeo is the brand for professional solutions with tested quality. In our extensive range, you will find first-class products for home and garden, from floors to wall coverings to decking: we offer you suitable items with a top price-performance ratio for almost every requirement and budget. We also have product lines such as carpets, wall paints, wallpapers and doors. The range of attractive offers for walls, floors and patios is rounded out by high-quality accessories and effective cleaning and maintenance products. Meanwhile, planeo's services go beyond the trade in floor coverings. We put great emphasis on the idea of service in everything we do. We deal with the topics of material, handling and realisation in such detail that we can provide you with an adequate solution for many different situations on the building site. To make things more clear, you can find useful tips and instructions in our guides with articles and videos. Beautiful flooring and more? Realise easily with planeo.

item no.: 60061907-N

Mineral carrier plate
easy processing
phthalate-free
good for renovations

Technical data

item no.	60061907-N
Manufacturer	planeo
Collection	Rigid
Length in mm	1220
Width in mm	225
Thickness in mm	5.5
Wear layer	0,50 mm
Wear class	42 Industrial (moderate)
Joint	Beveled edge (4 sides)
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Sorting (grain)	lively/rustic
Special features	Integrated impact sound, Pet Friendly, Suitable for humid rooms, Non-slip
EAN	4062212194829
Piece per package	8
Structure	Rigid SPC
Slip resistance	R10
Shipping group	M
Weight	20,46 kg / Packing
Colour	brown
Style	Classic
Range of application	Residential, Commercial
Click variant	DropDown
Underfloor heating	Hydronic UFH compatible
Package Content	2,20 m²

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

planeo Click vinyl - Rigid oak rustic (60061907-N)

We recommend the following accessories

Product description

Technical data

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?