MSRP 103,90 €

Package price (2,08 m²): 62,19 €

MSRP 49,95 €

Price 1 m²: 29,90 €

FREE

SAMPLE

VAT included plus. 102,90 € shipping costs for deliveries to DE

L 2

Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Premium samples

More information

planeo Click Vinyl - Rigid Oak Roma | integrated impact sound insulation (MF-1015)

0,50 mm Wear layer - 42 Industrial (moderate) - Rigid SPC - Beveled edge (4 sides) - Wood effect - Plank pattern - brown - XL plank floor - Synchronized embossing - Suitable for humid rooms - Free of harmful plasticizers

Item no.: MF-1015

Decor synchronised surface.
State-of-the-art core board - mineral and highly compacted.
Reduced swelling and shrinkage behaviour.
Impact sound insulation is integrated.
Extra large plank in parquet format.
Simple and uncomplicated processing.
Phthalate-free - no harmful plasticisers.
Very well suited for renovations.

Premium samples

More information

Decor synchronised surface.
State-of-the-art core board - mineral and highly compacted.
Reduced swelling and shrinkage behaviour.
Impact sound insulation is integrated.
Extra large plank in parquet format.
Simple and uncomplicated processing.
Phthalate-free - no harmful plasticisers.
Very well suited for renovations.

DIY - Videos

Technical details

Offer request

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

The planeo Rigid vinyl floor for clicking is a strong choice for any living area of your own home.

With integrated impact sound insulation, it provides a noise-reduced environment and a pleasant walking experience

The XL plank in parquet format gives your room an appealing and natural look. Thanks to its simple processing, the floor is easy to install, even for do-it-yourselfers.

In addition, it is phthalate-free, which means it is environmentally friendly and harmless to health

The planeo Rigid click vinyl is also ideal for renovations as it can be installed over existing subfloors such as tiles or wood, saving time and money. Enjoy durability, aesthetics and comfort with this high-quality floor covering

item no.: MF-1015

XL plank
mineral carrier board
easy processing
phthalate-free
well suited for renovations

Technical data

item no.	MF-1015
Manufacturer	planeo
Collection	Rigid
Length in mm	1828
Width in mm	228
Thickness in mm	6.5
Wear layer	0,50 mm
Wear class	42 Industrial (moderate)
Joint	Beveled edge (4 sides)
Warranty	5 Jahre Privat, 3 Jahre Gewerbe
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Sorting (grain)	lively/rustic
Special features	Integrated impact sound, Non-slip, Simple assembly, Suitable for humid rooms, XL Size
EAN	4062212185094
Piece per package	5
Structure	Rigid SPC + insulation
Click system	5Gi
Slip resistance	R10
Shipping group	L 2
Weight	20,00 kg / Packing
Colour	brown
Style	Country house
Range of application	Residential, Commercial, Industrial
Click variant	DropDown
Underfloor heating	Hydronic UFH compatible
Package Content	2,08 m²

Downloads

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

planeo Click Vinyl - Rigid Oak Roma | integrated impact sound insulation (MF-1015)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?