We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
Parador Rigid Click Vinyl consists of an acoustic backing, a robust SPC carrier layer, the decorative layer, a vinyl wear layer and a UV coating layer. The structure gives the floor its robust properties.
- versatile Thanks to its SPC core board, the vinyl can be used in heavily frequented private areas or normally used commercial areas.
- waterproof Parador Rigid floors can be used in every room of the house. Its water-resistant property also allows it to be installed in the kitchen and bathroom.
- easy to install The click connection makes installation easy. You save the purchase of expensive, professional tools and additional impact sound insulation. In addition, the floor can be laid on slightly uneven subfloors thanks to the stable SPC core board.
- pleasant walking feeling The integrated impact sound insulation ensures quiet room acoustics and the soft all-vinyl surface creates a foot-warm walking feeling.
From the time it was founded in 1977, Parador has consistently set flooring standards. With the first engineered wood floor with the patented AUTOMATIC-CLICK system, Parador launched a real innovation on the market in 2000. Today, the company based in Coesfeld is active in 65 countries worldwide and has 600 employees at 3 locations. In total, the Parador product range includes more than 2500 products for floor and wall design, which fully live up to the Parador motto "living performance". The Parador range includes high-quality vinyl floors, engineered wood, laminate, carpets, wall and ceiling panels, screens and more. These are produced under environmentally friendly and sustainable conditions by trained specialists in Germany and Austria. Parador thus offers its customers premium quality "Made in Germany" and "Made in Austria" products. Several international awards, including the Red Dot Design Award 2009, the AIT Award 2011 and the Interior Innovation Award 2011, attest the high quality and innovative nature of Parador products.
|Length in mm||1209|
|Width in mm||225|
|Thickness in mm||5.3|
|Wear layer||0,30 mm|
|suitable for||Private, Business, Bath, Kitchen, Bedroom & living room, Hallway & Corridor|
|installation pattern||Plank pattern (1-plank)|
|Underfloor heating||Warmwasser-FBH geeignet|
|Special features||Integrated impact sound, Non-slip|
|Piece per package||8|
|Package Content||2.17 m²|
Show all data ▼
|Parador Basic 5.3 - Datenblatt|
|Parador Basic 5.3 - Technical data sheet EN|
|Parador Basic 5.3 - Guide EN|
|Parador Basic 5.3 - Warranty conditions EN|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
Variant: DIY instructions
Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.
For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.
Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!
It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.
ATTENTION: When laying, keep the edge distances of 5mm.
Finally, attach the baseboards with a mounting adhesive.
- Click-vinyl with integrated impact sound insulation
- Professional cutter knife
- Pull bar
- Tapping block
- Rubber mallet
- Measuring tape
- Spirit level
- PE vapour barrier*
- 4-5 hours for a room size of approx.15-20 m².
*Required for floors with HDF core board and cork impact sound insulation
Are you looking for a lower price? Just ask us for an individual offer!