MSRP 101,40 €

Package price (2,03 m²): 78,97 €

MSRP 49,95 €

Price 1 m²: 38,90 €

FREE

SAMPLE

VAT included plus. 83,90 € shipping costs for deliveries to DE

L

MEISTER click Vinyl - MeisterDesign RB 400S Moon Dust (400013-0851397-07411)

0,55 mm Wear layer - 33 Commercial (heavy) - Rigid SPC - Micro bevel - Concrete effect|Tile effect - Tile format - grey

Item no.: 5953007411

For all living areas & wet rooms (kitchen & bathroom).
Commercial areas with heavy load.
Particularly high dimensional stability thanks to phthalate-free rigid core board.
Integrated impact sound insulation.
Suitable for hot water underfloor heating.

To cut the planks to size, we recommend using a saw (hand saw, jigsaw or crosscut saw) due to the robust core material.

Offer request

Description

Technical data

DIY - Videos

Product description

MeisterDesign Rigid flooring as a plank combines comfort, stability, appearance and sustainability. The innovative Rigid core flooring is characterised by the following properties:

multilayer vinyl surface with PUR coating
Acoustically insulating
special rigid core core board

in addition to high dimensional stability when exposed to heat, offers additional protection against the effects of moisture and is also suitable for kitchens and bathrooms.

The new MeisterDesign. rigid is presented in two categories: the two hard-wearing variants RL 400 S as a plank for a wood look & variant RB 400 S as a tile look in natural stone decors. The second category includes the comfortable variant RD 300 S as a short plank in various warm and natural wood designs. This variety gives each of your rooms an individual touch.

Meister stands by its good name and gives a 25-year guarantee for residential and a 5-year guarantee for commercial flooring.

MEISTER

MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.

item no.: 5953007411

Suitable for humid rooms
circumferential micro joint
phthalate-free
easy to lay

Technical data

item no.	5953007411
Manufacturer	MEISTER
Collection	MeisterDesign
Collection variant	RB 400S
Length in mm	851
Width in mm	397
Thickness in mm	6
Wear layer	0,55 mm
Wear class	33 Commercial (heavy)
Joint	Micro bevel
Warranty	25 Jahre Privat, 5 Jahre Gewerbe
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Tile format
Installation type	click
Look	Concrete effect, Tile effect
Sorting (grain)	natural/classic
Special features	Integrated impact sound
EAN	4011138393373
Piece per package	6
Structure	Rigid SPC
Click system	Multiclic
Slip resistance	R9
Shipping group	L
Weight	20,51 kg / Packing
Colour	grey
Style	Modern
Range of application	Residential, Commercial
Click variant	UniClic
Underfloor heating	Hydronic UFH compatible
Package Content	2,03 m²

Downloads

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

MEISTER click Vinyl - MeisterDesign RB 400S Moon Dust (400013-0851397-07411)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?