MSRP 126,25 €

Package price (2,21 m²): 116,41 €

Price 1 m²: 52,70 €

incl. 19% VAT. plus. 49,95 € shipping costs for deliveries to DE

M

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Offer request

KWG click Vinyl - Trend Vogue Solidtec Flair Stone (525009)

0,30 mm Wear layer - 33 Commercial (heavy) - Full vinyl - No bevel - Concrete effect - Tile format - light grey

Item no.: 525009

Textured wear layer with PU coating.
Trend Vogue design paper.
Stone-Powder composite backing.
Integrated impact sound insulation.
Accessories: PE foil.

Offer request

Description

Technical data

DIY - Videos

Product description

Textured wear layer with PU coating.
Trend Vogue design paper.
Stone-Powder composite backing.
Integrated impact sound insulation.
Accessories: PE foil.

KWG

KWG located in Schönau near Heidelberg is known as a reliable partner for innovative floor design. Founded in 1972 with the purpose of marketing cork flooring, KWG is now a broad-based flooring specialist for exquisite products. The manufacturer's range includes vinyl and cork floors as well as corresponding accessories for floor care. KWG showed pioneering spirit by introducing the designer vinyl ready-made floor "Antigua" for the first time in 2006. The 2017 innovation series includes the completely new mineral design floor JAVA, which can generally be used indefinitely.

item no.: 525009

Technical data

item no.	525009
Colour	light grey
Piece per package	5
Special features	Trittschall integriert, Feuchtraumgeeignet, Wasserfest
suitable for	Küche, Schlaf & Wohnzimmer, Diele & Flur
installation pattern	Tile format
Installation type	click
Sorting (grain)	calm/elegant
Underfloor heating	suitable
Structure	Full vinyl
Joint	No bevel
Look	Betonoptik
Length in mm	940
Width in mm	470
Wear layer	0,30 mm
Collection	Trend Vogue Solidtec
Shipping group	M
Manufacturer	KWG
Thickness in mm	5

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness exceeding 3mm should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. laying instructions

Tips on the drop-down click system: In order to achieve the most uniform appearance of the floor, it is advisable to install panels from different packages mixed together. You should start laying in one corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, place the plank at an angle to the long side of the row already laid and fold it down. With the help of a rubber mallet, you can lock the face of the following planks by gently hitting them. To cut a plank, now take measurements and mark the plank. Then take an angle and tear and break the plank with a multi-purpose knife/cutter.

button

5. finishing the last row

The last plank of a row should be the same length as the first plank. Place the spacers against walls, door frames, fixed wall cabinets, kitchen units etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

KWG click Vinyl - Trend Vogue Solidtec Flair Stone (525009)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?