Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Offer request

Gerflor Senso Lock 20 - Travertine

Click vinyl flooring in a warm stone look

Item no.: 36670201

Quick and easy to install, no adhesive required.
No harmful softeners.
Easy maintenance and cleaning with water and conventional neutral cleaners.
Proven Gerflor quality at a low price.
Suitable for damp areas - waterproof and non-slip.

Offer request

Description

Technical data

DIY - Videos

Product description

Quick and easy to install, no adhesive required.
No harmful softeners.
Easy maintenance and cleaning with water and conventional neutral cleaners.
Proven Gerflor quality at a low price.
Suitable for damp areas - waterproof and non-slip.

Gerflor Senso Lock 20 - the ideal vinyl floor to click on for private areas in natural authentic decors

extremely fast installation
feels real
is removable
Can be laid on tiles

For ceramic tile subfloors with a joint width of max. 4mm and a joint depth of max. 2mm, Gerflor vinyl flooring can be laid over them

Gerflor

Gerflor, a leading flooring manufacturer, has a 70-year history of producing resilient floor coverings for residential and commercial applications. The French company was founded in Lyon in 1937 and always focused on innovation, healthy materials and aesthetic floor design when developing new flooring solutions. Gerflor is right about its success - numerous awards attest to the first-class quality, the design, and the environmentally friendly aspect of Gerflor products. The Red Dot Award competition honors Gerflor's Creation 70 with the Red Dot Award for Product Design 2016.

item no.: 36670201

Technical data

item no.	36670201
Colour	beige
Piece per package	11
suitable for	Bad, Schlaf & Wohnzimmer
installation pattern	Tile format
Installation type	click
Sorting (grain)	natural/classic
Underfloor heating	suitable
Structure	Full vinyl
Joint	Beveled edge (4 sides)
Look	Steinoptik, Fliesenoptik
Length in mm	602
Width in mm	298
Wear layer	0,20 mm
Collection	Senso Lock 20
Shipping group	S
Manufacturer	Gerflor
Thickness in mm	3.4

Downloads

Print page

DIY step by step

Variant: DIY Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness that exceeds 3 mm over a length of 1 m should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. installation instructions

Tips for the UniClic system: To achieve as uniform a floor appearance as possible, it is recommended to install panels from different packages mixed together. You should start laying in a corner (left) and starting from the wall. With the tongue side facing the wall, lay the first board. Angle the end of the second board into the first. In the second row, the plank is placed at an angle to the end face of the row already laid and folded down. As the board is folded down, the long side of the board will click into the existing board at an angle. With a little pressure, the click joints now snap into place. The transverse joints (front side) should be offset by at least 30 cm from row to row ("wild bond", half a plank length for tile formats). You can use a tapping block and a light tap on the long side of the plank to help it along. To cut a plank, now take measurements and mark the plank. Then take an angle and tear the plank with a multi-purpose knife/cutter and break it off.

button

5. finishing the last row

Place the spacers on walls, door frames, fixed wall cabinets, kitchen units, etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

Gerflor Senso Lock 20 - Travertine

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?