Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Offer request

forbo click Vinyl - Enduro Natural White Oak (69130CL3)

0,30 mm Wear layer - 31 Commercial (light) - Full vinyl - Beveled edge (4 sides) - Wood effect - Plank pattern - white

Item no.: 69130CL3

Provides a special look in the rooms.
Long service life.
High wear layer of 0.3 mm.
Ideal for renovations.
Slip resistant thanks to R10 slip class

Offer request

Description

Technical data

DIY - Videos

Product description

Provides a special look in the rooms.
Long service life.
High wear layer of 0.3 mm.
Ideal for renovations.
Slip resistant thanks to R10 slip class

The high-quality solid vinyl is insensitive to moisture and therefore also allows you to install it in bathrooms and kitchens.

Easy to install and maintain
Resistant and robust
Variety of decors
Non-slip

forbo

Forbo Flooring Systems provides quality flooring throughout the world. Linoleum, carpet tiles and vinyl flooring are all part of the product range. One of the pillars of the Forbo Group is Forbo Flooring Systems. Please visit the Forbo Group website for more information on the Group structure, the Board of Directors and key figures.

From 1928 to the present day and beyond: growth from success to success. The entrepreneurial experience has made Forbo what it is today. The company's global activity brings it closer to markets and customers. Dialogue with them enables Forbo to think ahead and anticipate strategic opportunities before they are there. Forbo is a company that is constantly evolving.

item no.: 69130CL3

robust & durable
insensitive to dirt
underfloor heating
easy to install
suitable for humid areas
Non-slip
Easy to clean
High performance

Technical data

item no.	69130CL3
Colour	white
Piece per package	10
Special features	Rutschfest
suitable for	Bad, Küche, Schlaf & Wohnzimmer, Diele & Flur
installation pattern	Plank pattern (1-plank)
Installation type	click
Sorting (grain)	natural/classic
Wood type	Oak
Underfloor heating	suitable
Structure	Full vinyl
Joint	Beveled edge (4 sides)
Look	Holzoptik
Length in mm	1212
Width in mm	185
Wear layer	0,30 mm
Collection	Enduro
Shipping group	M
Manufacturer	forbo
Thickness in mm	4

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness exceeding 3mm should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. laying instructions

Tips on the drop-down click system: In order to achieve the most uniform appearance of the floor, it is advisable to install panels from different packages mixed together. You should start laying in one corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, place the plank at an angle to the long side of the row already laid and fold it down. With the help of a rubber mallet, you can lock the face of the following planks by gently hitting them. To cut a plank, now take measurements and mark the plank. Then take an angle and tear and break the plank with a multi-purpose knife/cutter.

button

5. finishing the last row

The last plank of a row should be the same length as the first plank. Place the spacers against walls, door frames, fixed wall cabinets, kitchen units etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

forbo click Vinyl - Enduro Natural White Oak (69130CL3)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?