Haro Parquet Flooring - Series 4000 NF Stab LA Maxim 4V naturaLin plus Oak sand gray Markant (540994)

Haro Parquet Flooring - Series 4000 NF Stab LA Maxim 4V naturaLin plus Oak sand gray Markant (540994)

Haro Parquet Flooring - Series 4000 NF Stab LA Maxim 4V naturaLin plus Oak sand gray Markant (540994)

Watch the video

Sold out soon

Article temporary not available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Haro Parquet Flooring - Series 4000 NF Stab LA Maxim 4V naturaLin plus Oak sand gray Markant (540994)

3,5 mm Wear layer - 2-layer - No bevel - Click system Tongue & Groove - Plank pattern - oiled - brushed - sand

Item no.: 540994

Maße: 2200 x 180 x 11mm.

Paketinhalt: 3,56m².

Nutzschicht: 3,5mm.

Oberfläche: PERMADUR Versiegelung naturmatt.

Ausführung: 1-Stab Landhausdiele.

Warmwasser-Fußbodenheizung geeignet.

Verlegung: Vollflächige Verklebung mit Nut und Feder

Request alternative

Description

Technical data

DIY - Videos

Product description

HARO

With the high-quality floor coverings from HARO, Germany's leading manufacturer of parquet floors, you quickly feel at home. Thus it is no surprise, of all things, that the company's slogan is "At home at last.". Because HARO floors conjure up a homely atmosphere in your rooms that inspires. The owner-managed family business from Bavaria was founded in 1866 as a wood processing company. The subsidiary Hamberger Flooring GmbH is responsible for all HARO activities in the laminate, parquet and cork flooring sector. Customers in over 90 countries worldwide trust the impeccable quality of exquisite HARO brand floor coverings.

item no.: 540994

Technical data

item no.	540994
Manufacturer	Haro
Length in mm	2200
Width in mm	180
Thickness in mm	11
installation pattern	Plank pattern (1-plank)
Installation type	glue
Wood type	Oak
Surface treatment	oiled
EAN	4018427469382
Weight	22,64 kg / Packing
Colour	sand
Structure	2-layer
Joint	No bevel
Wear layer	3,5 mm
Piece per package	9
Collection	Series 4000
Collection variant	NF Stab LA Maxim 4V naturaLin plus
Range of application	Residential
Click system	Tongue & Groove
Shipping group	L
Package Content	3,56 m²

Print page

DIY step by step

Variant: DIY-Instruction

1. substrate check

The subfloor should be permanently dry, load-bearing and even.

ATTENTION: Never lay parquet over a soft subfloor, e.g. over carpet, cork or any type of foam underlay.

2. acclimatisation

The planks should be stored horizontally in the room where they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

3. subfloor preparation

Then clean the surface to be laid with a hoover. Any unevenness exceeding 3 mm per linear metre is sanded down and filled with a floor levelling compound.

Click:

4. before laying

Spread out the PE foil with an overlap of approx. 10 cm and tape it down.Now you can lay out the strips of impact sound insulation butt to butt against the laying direction of the floor covering and fix all overlaps with aluminium tape. The foil side should always face upwards.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

5. laying instructions

Lay the first plank well aligned on the subfloor, taking the edge distances into account. You can start laying the floor on the left side of the room. In the first row, the plank is clicked in with the front side. Use a rubber mallet to tap lightly on the front side so that the click connection snaps in well. In the next row, the planks are first clicked in with the long side and then the ends can be fixed by tapping lightly. To cut a plank, now take measurements and mark the plank. This is then cut with a jigsaw or crosscut saw.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall and between the flooring and all fixed components.

6. last row

Cut the planks of the last row to size and click them in place using a pull iron. Finally, the planks can be tapped down again with a hammer.

7. finish

The PU foil is now cut approx. 2 cm high and the skirting boards can be fitted. Here there is the click or glue variant.

Glue:

4 Before gluing

Lay out the first two rows of planks and make marks in the subfloor with a pencil. The planks can be cut to size using a crosscut saw.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

5. laying instructions

Now pick up the planks again and apply the adhesive up to the marking with a notched trowel. Align the first plank and place it in the wet bed. The second plank is clicked into the already lying plank with the front side. The boards of the next row are laid first with the long side, then with the short side. Then the adhesive for the next two rows can be applied and the planks can be glued.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall as well as to all fixed components.

6. last row

Finally, you can attach the skirting boards.

Helpful Videos

DIY step by step

Variant: DIY-Instruction

1. substrate check

The subfloor should be permanently dry, load-bearing and even.

ATTENTION: Never lay parquet over a soft subfloor, e.g. over carpet, cork or any type of foam underlay.

2. acclimatisation

The planks should be stored horizontally in the room where they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

3. subfloor preparation

Then clean the surface to be laid with a hoover. Any unevenness exceeding 3 mm per linear metre is sanded down and filled with a floor levelling compound.

Click:

4. before laying

Spread out the PE foil with an overlap of approx. 10 cm and tape it down.Now you can lay out the strips of impact sound insulation butt to butt against the laying direction of the floor covering and fix all overlaps with aluminium tape. The foil side should always face upwards.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

5. laying instructions

Lay the first plank well aligned on the subfloor, taking the edge distances into account. You can start laying the floor on the left side of the room. In the first row, the plank is clicked in with the front side. Use a rubber mallet to tap lightly on the front side so that the click connection snaps in well. In the next row, the planks are first clicked in with the long side and then the ends can be fixed by tapping lightly. To cut a plank, now take measurements and mark the plank. This is then cut with a jigsaw or crosscut saw.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall and between the flooring and all fixed components.

6. last row

Cut the planks of the last row to size and click them in place using a pull iron. Finally, the planks can be tapped down again with a hammer.

7. finish

The PU foil is now cut approx. 2 cm high and the skirting boards can be fitted. Here there is the click or glue variant.

Glue:

4 Before gluing

Lay out the first two rows of planks and make marks in the subfloor with a pencil. The planks can be cut to size using a crosscut saw.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

5. laying instructions

Now pick up the planks again and apply the adhesive up to the marking with a notched trowel. Align the first plank and place it in the wet bed. The second plank is clicked into the already lying plank with the front side. The boards of the next row are laid first with the long side, then with the short side. Then the adhesive for the next two rows can be applied and the planks can be glued.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall as well as to all fixed components.

6. last row

Finally, you can attach the skirting boards.

planeo parquet installation instructions

planeo parquet installation instructions

Glue down parquet - glue down parquet flooring on wooden subfloor

Glue down parquet - glue down parquet flooring on wooden subfloor

Floating installation parquet plank oak 1-plank UV-oiled

Floating installation parquet plank oak 1-plank UV-oiled

Discolouration of parquet - UV radiation and the effects

Discolouration of parquet - UV radiation and the effects

Parquet in the kitchen

Parquet in the kitchen

Oiled parquet. Advantages and disadvantages

Oiled parquet. Advantages and disadvantages

Varnished parquet. Advantages and disadvantages

Varnished parquet. Advantages and disadvantages

Store parquet correctly - this is what you should consider before laying!

Store parquet correctly - this is what you should consider before laying!

Laying herringbone parquet yourself is easy - herringbone floorboards to click on

Laying herringbone parquet yourself is easy - herringbone floorboards to click on

¹ We are available by phone from Monday to Friday from 8 a.m. to 5 p.m. and Saturday from 9 a.m. to 2 p.m. ² For express delivery service, there is a charge of 10 euros; for the package and 50 euros; for the shipping deliveries. Express delivery is only possible within mainland Germany and only if all products in the shopping basket are ready for express delivery. In addition, notification by the delivery service is omitted. ³ The storage service is free for up to 9 months with the creation of a customer account and is only available for orders over €2,500; terraces, façades, and clearance items are excluded. ⁴ The sample service includes up to 5 product samples and is free of charge for the delivery areas: Germany, Europe 1 and 2. You can see the availability of the sample by clicking on the « sample » button on the product page. ⁵ The voucher is valid from an order value of 149 euros;. Multiple voucher promotions cannot be combined with each other.^* While stocks last.