Article no more available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Haro Organic Flooring - Disano ClassicAqua Piazza 4V Marble anthracite stone (540367)

Name: Haro Organic Flooring - Disano ClassicAqua Piazza 4V Marble anthracite stone (540367)
Brand: HARO
SKU: 540367
Availability: InStock

33 Commercial (heavy) - Multilayer - Beveled edge (4 sides) - Tile effect - Tile format - black

Item no.: 540367

Request alternative

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

HARO

With the high-quality floor coverings from HARO, Germany's leading manufacturer of parquet floors, you quickly feel at home. Thus it is no surprise, of all things, that the company's slogan is "At home at last.". Because HARO floors conjure up a homely atmosphere in your rooms that inspires. The owner-managed family business from Bavaria was founded in 1866 as a wood processing company. The subsidiary Hamberger Flooring GmbH is responsible for all HARO activities in the laminate, parquet and cork flooring sector. Customers in over 90 countries worldwide trust the impeccable quality of exquisite HARO brand floor coverings.

item no.: 540367

Technical data

item no.	540367
Manufacturer	Haro
Collection	Disano ClassicAqua
Collection variant	Piazza 4V
Length in mm	631
Width in mm	313
Thickness in mm	9.8
Wear class	33 Commercial (heavy)
suitable for	Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Tile format
Installation type	click
Sorting (grain)	lively/rustic
Look	Tile effect
Warranty	25 Jahre Privat, 5 Jahre Gewerbe
Special features	Integrated impact sound, Blue Angel
EAN	4018427458782
Structure	Multilayer
Joint	Beveled edge (4 sides)
Piece per package	7
Click system	5G
Shipping group	L
Click variant	DropDown
Weight	11,55 kg / Packing
Colour	black
Range of application	Residential, Commercial
Underfloor heating	Hydronic UFH compatible
Package Content	1,39 m²

Downloads

Print page

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness exceeding 3mm should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. laying instructions

Tips on the drop-down click system: In order to achieve the most uniform appearance of the floor, it is advisable to install panels from different packages mixed together. You should start laying in one corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, place the plank at an angle to the long side of the row already laid and fold it down. With the help of a rubber mallet, you can lock the face of the following planks by gently hitting them. To cut a plank, now take measurements and mark the plank. Then take an angle and tear and break the plank with a multi-purpose knife/cutter.

button

5. finishing the last row

The last plank of a row should be the same length as the first plank. Place the spacers against walls, door frames, fixed wall cabinets, kitchen units etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

Helpful Videos

DIY step by step

Variant: DIY-Instruction

button

1. substrate preparation

Check the subfloor. Any unevenness exceeding 3mm should be sanded down or filled with a floor levelling compound. Then clean the surface to be laid with a hoover.

CAUTION: Never install vinyl over a soft subfloor such as carpet, cork or any type of foam underlay.

button

2. acclimatisation

The vinyl planks should be stored horizontally in the room where it is to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after installation.

button

3. before laying

Before laying the floor, it is imperative to follow the official laying instructions, which are included in every package, otherwise any claim to warranty and guarantee will be void!

Before laying out the floor, check the wall you are starting on and make sure it is at right angles to the opposite wall. If the impact sound insulation is not already integrated, we now recommend spreading out the insulation.

button

4. laying instructions

Tips on the drop-down click system: In order to achieve the most uniform appearance of the floor, it is advisable to install panels from different packages mixed together. You should start laying in one corner (left) and starting from the wall. Lay the first plank with the tongue side facing the wall. Then snap the second plank into the first from the top on the face side. In the second row, place the plank at an angle to the long side of the row already laid and fold it down. With the help of a rubber mallet, you can lock the face of the following planks by gently hitting them. To cut a plank, now take measurements and mark the plank. Then take an angle and tear and break the plank with a multi-purpose knife/cutter.

button

5. finishing the last row

The last plank of a row should be the same length as the first plank. Place the spacers against walls, door frames, fixed wall cabinets, kitchen units etc. so that you have an expansion gap of approx. 5-10mm for underfloor movement or expansion of the product. To install the last row, it is recommended to use the floor layer's jointing iron from the accessories. When using skirting boards, make sure that the expansion joint is covered by the skirting board. If the floor is sealed, e.g. in the bathroom, the PE round cord is now inserted into the expansion joint and the floor sealed with a silicone joint.

button

6. attach skirting boards

Finally, cut off the PU film approx. 2 cm high and attach the skirting boards.

Haro Organic Flooring - Disano ClassicAqua Piazza 4V Marble anthracite stone (540367)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

DIY step by step

Wineo Purline 1000 - floating installation

Wineo Purline Wood - glue down organic floor

Laying vinyl flooring on tiles, how wide and deep should the joint be?

Laying a floor on a heating pipe

Checking the subfloor before laying flooring

Shortening door frames