With the high-quality floor coverings from HARO, Germany's leading manufacturer of parquet floors, you quickly feel at home. Thus it is no surprise, of all things, that the company's slogan is "At home at last.". Because HARO floors conjure up a homely atmosphere in your rooms that inspires. The owner-managed family business from Bavaria was founded in 1866 as a wood processing company. The subsidiary Hamberger Flooring GmbH is responsible for all HARO activities in the laminate, parquet and cork flooring sector. Customers in over 90 countries worldwide trust the impeccable quality of exquisite HARO brand floor coverings.
| item no. | 538710 |
|---|---|
| Manufacturer | Haro |
| Length in mm | 1282 |
| Width in mm | 193 |
| Thickness in mm | 10 |
| Wear class | 32 Commercial (moderate) |
| installation pattern | Plank pattern (1-plank) |
| Installation type | click |
| Look | Wood effect |
| Wood type | Oak |
| Underfloor heating | suitable |
| EAN | 4018427439699 |
| Click variant | DropDown |
| Collection | Tritty 100 |
| Collection variant | Silent CT |
| Joint | Beveled edge (4 sides) |
| Piece per package | 7 |
| Shipping group | L |
| Slip resistance | R9 |
| Weight | 12,30 kg/Packing |
| suitable for | Bedroom & living room |
| Package Content | 1.73 m² |
|
Show all data ▼
|
|
| Downloads | |
HARO Laminate Tritty 100 - Technical data sheet EN
|
|
|
HARO Laminate Tritty 100 - Installation instruction EN
|
|
|
HARO Laminate Tritty 100 - Cleaning and care instructions EN
|
|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
Variant: DIY-Instruction
button
The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.
CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.
button
The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.
button
Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.
Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!
button
Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.
You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.
ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.
button
If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.
button
Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.
Material:
- Laminate
- Vapour barrier
- Aluminium tape
Tools:
- Cutter knife
- Pencil
- Hammer
- Tapping block
- Tape measure
- Spirit level
- Spacer
optional:
- Skirting boards
- PE film
Working time:
- For a room size of 15-20 m² approx. 4-5 hours.
Difficulty level:
- easy
button Buying laminate: What do I need to know?
button Laminate surfaces and structures
button Laminate format variations - what are my decor options?
button Impact sound insulation for parquet, vinyl and laminate - planeo silence
button Laying vinyl flooring, laminate or parquet on old carpet - is it possible?
button Laying laminate in tile look
button cheap laminate
button Subfloor testing before laying floor coverings
Individual offer?
Are you looking for a lower price? Just ask us for an individual offer!