Article temporary not available

Storage at the desired date - free of charge up to 9 months³
Customer service until 5pm¹ - personal & close
DIY Videos - DIY Instructions

Strong Variant SPC click vinyl flooring - Glacier Oak (141268)

0.30 mm wear layer - 22 private (normal) - Rigid SPC - Micro bevel - Wood look - Plank - Brown - Integrated footfall sound insulation - Suitable for damp rooms - Authentic appearance - Easy to clean

Item no.: 141268

Rigid vinyl flooring is even easier to work with.
Less swelling and shrinkage behaviour.
Suitable for private and commercial use.
Well suited for renovations due to low build-up.

Request alternative

Description

Technical data

DIY - Videos

We recommend the following accessories

Product description

Discover the highest quality and timeless elegance with Rigid click vinyl!

The unique synchronised embossing gives the floor a fascinating wood structure that not only looks authentic, but is also close enough to touch.
The integrated footfall sound insulation ensures a quiet atmosphere and is easy on the ears - perfect for a relaxed home.
Immerse yourself in the natural beauty of the authentic wood look, which adds warmth and character to your room.
Whether living room, kitchen or bathroom - the Rigid vinyl flooring is suitable for damp rooms and ensures a breathtaking aesthetic in every room.
And the best thing? These floors are easy to maintain, saving you time and money.

item no.: 141268

simple processing
water-resistant
resistant
underfloor heating
integrated impact sound

Technical data

item no.	141268
Length in mm	1220
Width in mm	230
Thickness in mm	4.8
Wear layer	0,30 mm
Wear class	22 Residential (moderate)
Joint	Micro bevel
suitable for	Bath, Kitchen, Bedroom & living room, Hallway & Corridor
installation pattern	Plank pattern (1-plank)
Installation type	click
Wood type	Oak
Look	Wood effect
Sorting (grain)	natural/classic
Special features	Integrated impact sound
EAN	7640165929339
Piece per package	8
Structure	Rigid SPC
Shipping group	M
Weight	21,23 kg / Packing
Colour	brown
Style	Classic
Range of application	Residential
Click variant	UniClic
Underfloor heating	Hydronic UFH compatible
Package Content	2,25 m²

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Helpful Videos

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Strong Variant SPC click vinyl flooring - Glacier Oak (141268)

We recommend the following accessories

Product description

Technical data

DIY step by step

Helpful Videos

DIY step by step

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?