Article temporary not available

Customer service until 6pm¹ - personal & close
DIY Videos - DIY Instructions

Wineo Klick-Vinyl Multilayer - 400 stone Patience Concrete Pure (MLD00139)

robust vinyl tile with integrated impact sound - MADE IN GERMANY

Item no.: MLD00139

Perfectly bridges small unevennesses.
Integrated impact sound underlay ensures good room acoustics.
Suitable for WW underfloor heating and chair castors.
Ideally suited for renovations and refurbishments.
Robust and easy to clean thanks to Luxury Vinyl surface.

100% free of harmful plasticisers.

Offer request

Description

Technical data

DIY - Videos

Product description

Perfectly bridges small unevennesses.
Integrated impact sound underlay ensures good room acoustics.
Suitable for WW underfloor heating and chair castors.
Ideally suited for renovations and refurbishments.
Robust and easy to clean thanks to Luxury Vinyl surface.

100% free of harmful plasticisers.

Wineo 400 Multilayer Click is a multi-layer floor with HDF as the base material. This makes it just as dimensionally stable as a laminate, but at the same time quieter and warmer as well as easy on the joints.

Integrated impact sound insulation
The HDF middle layer and the integrated insulation mat create a pleasantly warm floor climate and reduce the noise in the room more effectively than with separately laid impact sound underlays.
Multi-layer floor covering

Environmentally friendly

wineo

As a brand of the internationally active company Windmöller, wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.

item no.: MLD00139

hard-wearing
HDF middle layer
easy to clean
good room acoustics
easy on the joints

Technical data

item no.	MLD00139
Colour	beige
Piece per package	9
Special features	Isolamento acustico integrato
suitable for	Cucina, Camera da letto e soggiorno, Ingresso e corridoio
installation pattern	Tile format
Installation type	click
Sorting (grain)	natural/classic
Underfloor heating	suitable
Structure	Multilayer
Joint	Micro bevel
Look	effetto cemento
Length in mm	601
Width in mm	310
Wear layer	0,30 mm
Collection	400
Style	Moderno
Shipping group	M
Manufacturer	Wineo
Thickness in mm	9

Downloads

Print page

DIY step by step

Variant: DIY instructions

button

1. Substrate preparation

Check for dust and level out any unevenness at the start. A screed scraper can easily remove minor bumps. You can use a spirit level to check whether the surface is smooth enough on a regular basis. Using a vacuum cleaner, clean the entire surface.

button

2. Acclimatization

For at least 48 hours prior to installation, the vinyl planks should be stored horizontally in the packs in the room where they will be installed. This allows the material to acclimate to room temperature and reduces the amount of "work" required after laying.

button

3. Laying instructions

Before laying of the planks, the official laying instructions included in each package must be followed; otherwise, any warranty and guarantee claims will be invalid!

It is best to mix and lay floorboards from different packs to achieve the most uniform floor possible. Using the 5 mm tapping block and a hammer, join the next complete plank to the front of plank 1. Lay the remaining planks in this row in the same manner across the entire width of the room. When working with a hammer and tapping block is not possible due to a lack of space, you can use a pull bar to click the front connection together. To cut a plank, first measure and mark it. Then, using a square, score the plank with a utility knife, cut through, and snap off the back impact sound insulation. You can easily create and lay the floor sections in the next row.

ATTENTION: When laying, keep the edge distances of 5mm.

button

4. Attach baseboards

Finally, attach the baseboards with a mounting adhesive.

Wineo Klick-Vinyl Multilayer - 400 stone Patience Concrete Pure (MLD00139)

Product description

Technical data

Downloads

DIY step by step

Helpful Videos

Click vinyl flooring installation guide

Laying vinyl flooring on tiles, how wide and deep can the joint be?

Is click vinyl flooring waterproof, and can it be used in bathrooms?

Checking the subfloor before installing flooring

The 10 most common mistakes when installing vinyl flooring - is it possible?

Laying vinyl flooring on old floorboards

Damp room flooring for bathrooms - sealing the flooring

Fill uneven tiles and joints

Laying floor along heating pipe

Vinyl flooring wear layer 0.3 or 0.5mm. Does a high wear layer protect against scratches?