Choose Shipping Country
Flooring world
My Account
Search

MEISTER Longlife-Parquet - Classic PC 200 Oak vivid cream 8326

Oak ship's floor with lacquered surface

    • Particularly resistant.
    • Natural sound and heat insulation.
    • For private and commercial use.
    • Suitable for WW underfloor heating.
› Technical Details
item no. 5319008326

Request a quote now

MEISTER

UVP €118.20

Package price (1,92 m²):
€107.62
Price 1 m²:
€56.05
incl. VAT - plus €49.95 shipping costs for CH  S

Include 5% blend

Your delivery date: until Tuesday 13. December

  • Storage at the desired date - free of charge for up to 90 days3
  • Customer service until 6pm¹ - personal & close
  • DIY Videos - DIY instructions
Description

MEISTER parquet from the Classic PC 200 series is rightly one of the classics among floor coverings. The high-quality planks are robust and durable.

  • Durable HDF core layer
  • Thanks to a special middle layer, the floor is particularly resistant. It is also very quiet and absorbs the sound of your footsteps. This makes Parquet Classic from MEISTER an ideal companion for your home as well as commercial areas.
  • Positive walking sound properties
  • Meister parquet has a natural sound insulation. This is due to a higher dead weight of the individual planks, which therefore vibrate less than comparable floor coverings.
  • Ideal for underfloor heating
At the same time, you can also install MEISTER Parquet Classic flooring on underfloor heating without any problems. As hardly any heat is lost, you save money on heating costs in winter.

 
  • robust
  • insensitive
  • sound-absorbing
  • scratch-resistant

MEISTER is the quality brand for flooring from MeisterWerke Schulte GmbH, a family-owned company. The innovative sales brand based in Ruthen-Meiste is available exclusively from specialist retailers. The wide range of floors, panels and accessories for the wood and building materials traded by MEISTER enjoys great popularity throughout Europe.



Technical Details
item no. 5319008326
Manufacturer MEISTER
Length in mm 2400
Width in mm 200
Thickness in mm 13
installation pattern Ship's floor (3-plank)
Installation type click
Sorting (grain) natural/classic
Wood type Oak
Surface treatment varnished
Underfloor heating Warmwasser-FBH geeignet
Warranty Lifetime Privat
EAN 4011138904418
Collection Parkett Classic
Collection variant PC 200
Joint No bevel
Piece per package 4
Shipping group S
Weight 19,78 kg/Packing
Package Content 1.92 m²
Show all data ▼
 
Downloads
Meister Parquet PC 200 lacquered - Technical data sheet EN
Meister Fußboden Verlege- und Pflegeanleitung
Meister Parquet PC 200 lacquered - Installation instruction EN
Meister Parkett auf Fußbodenheizung - Hinweise
Meister Parquet PC 200 lacquered - Warranty conditions EN
Meister Parkett - Garantiebedingungen
elektrische Fußbodenheizung - Hinweise

We will help you with your questions!


A specialist adviser will be happy
to advise you personally.


☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm

Product questions

Laying guide of the parquet

Variant: DIY-Instruction

button
1. substrate check

The subfloor should be permanently dry, load-bearing and even.

ATTENTION: Never lay parquet over a soft subfloor, e.g. over carpet, cork or any type of foam underlay.

button
2. acclimatisation

The planks should be stored horizontally in the room where they are to be installed for at least 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and not "work" so hard after the installation.

Before laying, it is imperative that the official laying instructions, which are included in each package, are followed, otherwise any claim to warranty and guarantee will be invalidated!

button
3. subfloor preparation

Then clean the surface to be laid with a hoover. Any unevenness exceeding 3 mm per linear metre is sanded down and filled with a floor levelling compound.

Click:

button
4. before laying

Spread out the PE foil with an overlap of approx. 10 cm and tape it down.Now you can lay out the strips of impact sound insulation butt to butt against the laying direction of the floor covering and fix all overlaps with aluminium tape. The foil side should always face upwards.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

button
5. laying instructions

Lay the first plank well aligned on the subfloor, taking the edge distances into account. You can start laying the floor on the left side of the room. In the first row, the plank is clicked in with the front side. Use a rubber mallet to tap lightly on the front side so that the click connection snaps in well. In the next row, the planks are first clicked in with the long side and then the ends can be fixed by tapping lightly. To cut a plank, now take measurements and mark the plank. This is then cut with a jigsaw or crosscut saw.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall and between the flooring and all fixed components.

button
6. last row

Cut the planks of the last row to size and click them in place using a pull iron. Finally, the planks can be tapped down again with a hammer.

button
7. finish

The PU foil is now cut approx. 2 cm high and the skirting boards can be fitted. Here there is the click or glue variant.

Glue:

button
4 Before gluing

Lay out the first two rows of planks and make marks in the subfloor with a pencil. The planks can be cut to size using a crosscut saw.

Tip: Open several packages of the parquet at the same time and mix the planks to achieve an optimal installation pattern.

button
5. laying instructions

Now pick up the planks again and apply the adhesive up to the marking with a notched trowel. Align the first plank and place it in the wet bed. The second plank is clicked into the already lying plank with the front side. The boards of the next row are laid first with the long side, then with the short side. Then the adhesive for the next two rows can be applied and the planks can be glued.

ATTENTION: There must always be a gap of approx. 10 mm between the flooring and the wall as well as to all fixed components.

button
6. last row

Finally, you can attach the skirting boards.

What you will need to make it yourself

Material:

Click version:

  • Parquet
  • Vapour barrier
  • PE foil
  • Aluminium tape

Adhesive variant:

  • Parquet
  • Adhesive

Tools:

  • Professional cutter knife
  • Spirit level
  • Pulling iron
  • Pencil
  • Rubber mallet
  • Tapping block
  • Measuring tape
  • Spacer

optional:

  • Skirting boards
  • Template for herringbone pattern

Working time:

  • Clicking: for a room size of 15-20 m² approx. 4-5 hours.
  • Gluing: for a room size of 15-20 m² approx. 6 hours

Level of difficulty:

  • Clicking: easy
  • Gluing: difficult

Individual offer?

Are you looking for a lower price? Just ask us for an individual offer!

Inquery

We use your data exclusively for contacting you and processing your request. By sending the contact form you agree that your data will be stored and processed electronically for possible queries. We will not pass on your data to third parties. You can withdraw your consent at any time with effect for the future. Please note our data protection declaration.

* Required Fields

Inquery
  • Bitte benötigtes Parkett Zubehör wählen.

We use your data exclusively to contact you and process your request and, if necessary, to prepare an offer. By sending the contact form you agree that your data will be stored and processed electronically for possible queries. We do not pass on your data to third parties. You can withdraw your consent at any time with effect for the future. Please note our data protection declaration.

* Required Fields