We just need your E-Mail and shipping address.
Feel free to add more samples to your sample cart afterwards.
The innovative wineo Rock`n`Go laminate flooring solution represents a complete system that promises maximum flexibility and comfort. The laminate product from Windmöller is particularly quiet thanks to the already integrated self-adhesive impact sound insulation, resistant to moisture and can be easily installed immediately after delivery.
- Extremely quiet thanks to Sound-Stop technology The laminate is equipped with the Sound-Stop Layer on the underside, a self-adhesive impact sound insulation that bonds with the subfloor and thus provides a high level of impact sound reduction.
- Suitable for damp rooms Very moisture-resistant thanks to Aqua-Stop technology, therefore also suitable for damp rooms.
- Clean and easy installation Rock'n'Go laminate is supplied ready to lay and can therefore be installed quickly and easily.
- Antistatic and UV-resistant
- Suitable for underfloor heating
- Integrated impact sound insulation
- made in Germany
- Private area: 25 years warranty
As a brand of the internationally active company Windmöller, Wineo operates in over 70 countries with quality floors for a wide range of applications. Originally created through the merger of the family-owned companies Windmöller and Witex, the East Westphalian group based in Augustdorf has been operating under the Wineo name since 2013. The sustainably produced floor coverings from Wineo feature the "Made in Germany" seal of quality and provide the optimum flooring solution for private areas, public facilities and light industry. All Wineo products undergo a 7-fold quality control and meet the highest standards. The 3rd generation family business is aware of its high social and ecological responsibility and has been focusing on environmentally compliant product design for years.
At Wineo you have the choice between PURLINE organic flooring, design floors for gluing or clicking as well as laminate flooring in different usage classes and formats. Additionally, the company offers skirting boards, aluminium profiles, insulation mats, and more. Create a stylish effect in your rooms with the resilient floor coverings in trendy designs from Wineo!
|Length in mm||1288|
|Width in mm||195|
|Thickness in mm||9|
|Underfloor heating||Warmwasser-FBH geeignet|
|Special features||Damp-proof laminate, Integrated impact sound|
|Piece per package||8|
|suitable for||Bath, Kitchen, Bedroom & living room, Hallway & Corridor|
|Package Content||2.01 m²|
Show all data ▼
|Wineo Rock`n`Go - Technical data sheet EN|
|Wineo Rock`n`Go - Installation instruction EN|
|Wineo Rock`n`Go - Cleaning and care instructions EN|
We will help you with your questions!
A specialist adviser will be happy
to advise you personally.
☎ +49 5222 960 4810
Mon - Fri: 9am - 6pm
Sat: 9am - 2pm
The substrate should be firm, even, clean, permanently dry, load-bearing, free of cracks and resistant to tension and compression. Any unevenness exceeding 3 mm must be sanded down and levelled with a floor levelling compound.
CAUTION: Never lay laminate over a soft subfloor, e.g. over carpet or on unsuitable underlays.
The planks should be stored horizontally in the room in which they are to be installed for approx. 48 hours before the installation in the packages. This will allow the material to acclimatise to the room temperature and it will not "work" as much after the installation.
Start by cleaning the surface to be laid with a hoover. Lay out the vapour barrier (for mineral subfloors) overlapping in the room. If the laminate flooring does not already have integrated impact sound insulation, we recommend that you lay the insulation butt to butt against the laying direction of the top covering and fix all overlaps with aluminium tape.
Before installation, it is imperative that you follow the official installation instructions that are included in each package, otherwise any warranty and guarantee claims will be void!
Tip: To achieve as uniform a floor appearance as possible, it is advisable to install panels mixed from different packages.
You should start laying in one corner (left) and starting from the wall. Lay the first panel with the tongue side facing the wall and place all the other panels against it. Depending on the collection, the next rows are first laid with the long side into the already lying planks and fastened by applying light pressure to the face side or first clicked in with the face side and the long side then clicks into place.
ATTENTION: A distance of approx. 10-15 mm must always be maintained between the floor covering and the wall as well as to all fixed components.
If possible, the last row should be half the width of the plank. To do this, please measure the exact width of the room before laying. Please also take note of the edge distances to the wall.
Finally, cut off the PE foil approx. 2 cm above the floor. The skirting boards can now be attached with a mounting adhesive or the special clips.
- Vapour barrier
- Aluminium tape
- Cutter knife
- Tapping block
- Tape measure
- Spirit level
- Skirting boards
- PE film
- For a room size of 15-20 m² approx. 4-5 hours.
Are you looking for a lower price? Just ask us for an individual offer!